Motorola ELECTRIFY Manual page 47

Turn Bluetooth power on or off
Settings
Find it: >
Bluetooth
>
Note: To extend battery life, turn Bluetooth power
off when not in use.
Tip: Turn off Bluetooth power to
extend battery life or stop
connections. To add a quick switch,
touch and hold a blank spot on your
home screen, then touch
Toggle
.
Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
Settings
2 Touch >
Bluetooth settings
>
Bluetooth
3 Touch to turn on and scan. If Bluetooth
power is already on, touch
Wireless & networks
>
Motorola Widgets Bluetooth
>
Wireless & networks
>
.
Scan for devices
.
4 Touch a device to connect.
OK
5 If necessary, touch
0000
(like ) to connect to the device. When the device
is connected, the Bluetooth indicator
the status bar.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
Reconnect devices
To automatically reconnect your phone with a paired
device, simply turn on the device.
To manually reconnect your phone with a paired device,
touch the device name in the
Change device name
Settings
Touch >
Bluetooth settings
> >
OK
touch .
, or enter the device passkey
appears in
Bluetooth devices
Wireless & networks
>
Device name
. Enter a name and
Bluetooth™ wireless
list.
45