Quick Start Guide - Motorola EASY START KIT HMEZ1000 Quick Start Manual

Quick Start Guide

11 Click Next. The Introduction to Detecting Wired Cameras window is displayed. If you purchased a
wired camera, you can connect it now.
12 Click Next. The Introduction to Detecting Devices window is displayed.
13 Click Next. The Device Discovery window is displayed:
Each device must be discovered to work with the system.
14 Plug in the wireless camera's 9V AC power adapter into an AC power outlet that cannot be
switched on and off. If possible, we recommend powering the camera using its AC adapter.
When AC power is not available, you can use batteries to provide power for about two hours of
video transmission. The Wireless Camera must use AC power for the discovery process.
15 To associate the Wireless Camera with your USB Gateway, push the
discovery button on the camera with the discovery tool.
After the camera is discovered, it is listed on the Device Discovery
window.
If desired, unplug the camera and move it to the desired location. The
camera will remain "discovered." For information about mounting the
camera, see the Wireless Camera Quick Start Guide.
16 Click Next. A window displays. If you have a Wi-Fi
choose the Wi-Fi network channel from the drop-down list and click Next. The Motorola Home
Monitor software intelligently works around this channel. If you do not have a Wi-Fi wireless
network, choose Don't Know from the drop-down list and click Next. You can change this later.
Page 4
®
wireless network,
Easy Start Kit
Discovery
button