Features
To Prevent Coverage of Inside Calls
Press Feature and dial 00.
1.
Press any ICOM or SA button.
2.
Do one of the following:
3.
P r e s s
4.
NOTE:
This feature does not require a programmed button.
Once you have dialed
covered. This remains in effect until you repeat this
procedure and dial
Coverage.
To Program a Coverage VMS Off
Button
Label the button to be programmed as
1.
Coverage VMS Off.
Press Feature and dial 00.
2.
Press the button you labeled Coverage VMS Off.
3.
Dial
46.
4.
Press Feature and dial
5.
5-22 C o v e r a g e
Dial
48 to prevent inside calls from going to
any kind of Coverage.
Dial
48 to send both inside and outside calls
to Coverage.
Feature and dial
48 only your outside calls are
48 to send all your calls to
00.
00.