Daewoo 710B Service Manual page 34

(l) Repeat (e),(f),(g),(h),(i),(j).
Just a difference from 9300°K mode is color coordinates.
Set color coordinates in X=0.313, Y=0.329
6. Static Convergence Adjustment
(a) Apply an magenta cross hatch pattern on display.
(b) Adjust the focus from the best over all focus on the display.
Also adjust the brightness to the desired condition.
(c) Vertical red and blue lines are converged by varying the angle between the two tabs of the 4-pole magnets.
(d) Horizontal red and blue lines are converged by varying the tabs together, keeping the angle between them
constant.
(e) Apply a white cross hatch pattern on display.
(f) Vertical green and magenta lines are converged by varying the the angle between the two tabs of the 6-pole
magnets.
(g) Horizontal green and magenta lines are converged by varying the tabs together, keeping the angle between
them constant.
32