Apex Digital DRX-9200 Owner's Manual page 60

4-1
SYMPTOM (COMMON)
PLAY does not start playback even when
title is selected.
Audio soundtrack and/or subtitle language
is not the one selected at the initial settings.
No subtitles.
Alternative audio soundtrack (or subtitle)
language available.
Angle cannot change.
No sound when connecting to
5.1 Channel speaker
SYMPTOM (COMMON)
No key operation (by the DVD Recorder
and/or the remote control) is effective.
No picture and sound (for recorded disc)
Distorted picture or no image
OSD setting wil not excecute
Wrong time
Troubleshooting
REMEDY
• This may be a result of the parental lock function that has been set. Confi rm the
"PARENTAL" setup.
• If the audio soundtrack and/or subtitle language does not exist on the disc, the
language selected at the initial settings will not be seen/heard.
• Subtitles appear only with discs that contain them.
• Subtitles are hidden from the TV screen. Press SUBTITLE to display the subtitles.
• An alternative language can not be selected may result of no more than one
lan guages cannot be selected.
• This function depends on software availability. Even if a disc has a number from
angles recorded, these angles may be recorded for specifi c scenes only.
• Check if the disc supports 5.1 Channel.
• Check if the speaker is properly connected.
• Check if the audio output setting is right.
REMEDY
• Turn the unit off and then back to on. Alternatively, turn off the unit, disconnect
the AC power cord and then re-connect it. (The player may not be operating
properly due to lightning, static electricity or some other external factor.)
• Check if this DVD Recorder and outer equipment are properly connected.
• Check if the schedule recording setting is correct.
• Check if using the correct recordable disc. (DVD+RW/DVD+R)
• Check if power set to stand-by mode while using schedule recording.
• Check if the disc has been closed. (only for DVD+R disc)
• Check if the TV system setting is correct.
• Check If you set output format in "Progressive Scan", then you have to set
"Com po nent" in the video output setting. The actual output format must match
to the output format setting.
• Some settings must be stored by pressing left button. Recheck it.
• Reset time.
-continued
RW RW RW RW RW
59