Motorola C375 Series Manual page 127

Attaching the Cable
Use a Motorola Original USB cable to connect your phone
to the external device.
Note: Your phone requires a mini-USB connector. Check
your computer or hand-held device to determine the type
of cable you need.
To Attach a Serial Cable
1 Use the interchangeable head on the Motorola
Multi-Connect Serial Cable to connect a
computer, Palm III device, or Palm V device to
your phone. Plug the serial cable into the
detachable head. Make sure that the Motorola
logo on the detachable head and the metal
shielding on the serial cable plug are both facing
you.
2 With the Motorola logo and the phone both
facing you, plug the detachable head into your
phone's accessory connector port.
3 Plug the other end of the cable into the serial
interface connection on the external device and
tighten the screws.
To Attach a USB Cable
1 Plug the end of the cable with the Motorola logo
into your phone's accessory connector port.
Make sure that the logo and the phone are both
facing you.
2 Plug the other end—the USB connection—into
the USB port on the external device.
127