Receiving A Phone Call - Motorola 8700 User Manual

Receiving a Phone Call

To receive a phone call:
• Your phone must be switched on and unlocked.
• You must be in an area where there is GSM service.
• Your Call Diversion and Call Barring settings should not be set
to divert or bar incoming calls.
When your phone receives a call, it will ring or vibrate and the
display will show the message (if you have Caller Line
Call
Identification, the caller's number or name will be displayed
instead).
To answer the call, press O or open the flip. If the signal
strength is weak then extend your antenna.
If you do not wish to answer a call you can either:
Press and release the C key. If you have enabled the
'Detailed Diverting - If Busy' option in the Options Menu, the
caller will be diverted to the forwarding number, otherwise
the caller will hear the busy tone.
or
Press and hold the C key. This will reject the incoming call.
No call divert option will be offered.
If your phone rings and you do not answer it, the message
will be displayed to show you that a call
Unanswered Call
attempt was received.
Ending a Phone Call
To end a phone call, press O or close the flip.
Making and Receiving Phone Calls
English
21