Table of Contents
Advertisement
ONew Security Code
The security code is used to control access to security and other
options within the menus.
This option is used to change the security code, which is set at
manufacture to 000000.
Once selected, you will be asked to enter the current security
code before you can proceed.
You will then be asked to enter a new, six digit code to replace
the old security code.
In order to safeguard your phone, you should change your
A
security code from the factory setting as soon as possible.
OExtended Menus
L
Press and hold M. Extended Menus will be temporarily
activated until you exit the Options menu.
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be able
to access any of the extended features.
The option has two settings,
or Off.
On
OLanguage Selection
This option is used to change the language for display messages.
The option has multiple settings.
When you select a language, all further display prompts and help
messages will be in the selected language.
OChange Greeting
This option is used to change the message displayed when you
switch on your phone.
Once selected, you will be able to enter a new greeting of up to
24 characters. See 'How to Enter Alphabetic Characters' in the
'Phone Book' section for more information.
The new greeting will be displayed when your phone is next
switched on.
Battery Saving Mode
This option can help you to conserve battery power. Also known
as DTX (Discontinuous Transmission), this feature will cause your
phone to operate at reduced power when you are not talking.
The option has two settings,
or Off.
On
OSelect Keypad Tones
This option allows you to change or disable tones you hear when
you press a key.
The option has three settings,
Normal
or
No
Tones.
Using The Features
Phone Setup Menu
Tones,
Single Tone
English
49
Advertisement
Table of Contents
