Mld Snooping; Browse Mld Router Port; Mld Snooping Group - D-Link DGS-3700 Series User Manual

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
Figure 7 - 33 Browse IGMP Snooping Counter window
Enter the VLAN Name, VLAN List or Port List of the VLAN you wish to view and click Find.

MLD Snooping

Browse MLD Router Port

This window displays which of the Switch's ports are currently configured as router ports in IPv6. A router port
configured by a user (using the console or Web-based management interfaces) is displayed as a static router port,
designated by S. A router port that is dynamically configured by the Switch and is designated by D, whereas a
Forbidden port is designated by F. Enter a VID (VLAN ID) in the field at the top of the window and click the Find
button.
To view this window, click Monitoring > MLD Snooping > Browse MLD Router Port as shown below:
Figure 7 - 34 Browse MLD Router Port window

MLD Snooping Group

The following window allows the user to view MLD Snooping Groups present on the Switch. MLD Snooping is an IPv6
function comparable to IGMP Snooping for IPv4. The user may browse this table by VLAN Name present in the
Switch by entering that VLAN Name in the empty field shown below, and clicking the Find button. The number of MLD
reports that were snooped is displayed in the Reports field.
To view this window, click Monitoring > MLD Snooping > MLD Snooping Group as shown below:
245