Table of Contents
Advertisement
Restart/Stop Execute: This option allows user to stop or restart the ADSL connection.
Showtime Firmware Version: This field displays the Conexant ADSL data pump firmware version
number.
ADSL Line Status: This field displays the ADSL connection process and status.
ADSL Modulation: This field displays the ADSL modulation status for G.dmt or T1.413.
ADSL Annex Mode: This field displays the ADSL annex modes for Annex A or Annex B.
ADSL Startup Attempts: This field displays the ADSL connection attempts after loss of showtime.
ADSL Max Tx Power: This field displays the transmit output power level of the CPE.
ADSL CO Vendor: This field displays the Central Office DSLAM vendor name, if available.
Elapsed Time: This field displays the time of the router has been in operation.
SNR Margin: Amount of increased noise that can be tolerated while maintaining the designed BER
(bit error rate). The SNR Margin is set by Central Office DSLAM. If the SNR Margin is increased, bit
error rate performance will improve, but the data rate will decrease. Conversely, if the SNR Margin is
decreased, bit error rate performance will decrease, but the data rate will increase.
Line Attenuation: Attenuation is the decrease in magnitude of the ADSL line signal between the
transmitter (Central Office DSLAM) and the receiver (Client ADSL Router), measured in dB. It is
measured by calculating the difference in dB between the signal power level received at the Client ADSL
router and the reference signal power level transmitted from the Central Office DSLAM.
Errored Seconds: The error during Showtime, whenever, a given see contains CRC error, that second
will be declared error second.
Loss of Signal: This field displays the count of event of ADSL signal loss.
Loss of Frame: This field displays the count of event of ADSL frame loss.
CRC Errors: This field displays the number of transmit data frames containing CRC errors.
Data Rate: This field displays the ADSL data rate.
Latency: This field displays the latency modes for fast or interleave.
5.3 Configuration Pages
The links under Configuration column are associated to the pages that represent the configurations of
system and interfaces. When the configurations are changed, please go to the Save Settings/Reboot page to
save the new settings and reboot the ADSL router.
5.3.1 WAN Configuration
The WAN configuration page allows the user to select Pvc adapter then set the configuration for the
WAN/ADSL ports which includes ATM, DHCP Client, MAC Spoofing, Static IP Settings and PPP.
ADSL Full-Rated Router
21
Advertisement
Table of Contents
