Acer HDS WMS100 Reference Manual page 187

5. Click the NNC LAN tab on the Configuration Settings screen.
6. Set the LAN Information.
LAN information: Refer to and set the network setting of NNC management port.
IP Address: Displays the current value of IP address and specifies the setting value.
–
Subnet Mask: Displays the current value of subnet mask and specifies the setting
–
value.
MTU: Displays the current value of MTU and specifies the setting value. The setting
–
value can be specified in the range of 1500 to 16110.
Negotiation: Displays the current value of Negociation and specifies s the setting
–
value.
7. Click the Apply button on the Configuration Settings screen after the setting is
completed.
8. A confirmation message appears. Click the OK button.
Acer | HDS WMS100™ User and Reference Guide 165