Igmp Interface Configuration - D-Link DES-3326S User Manual

DES-3326S Layer 3 Fast Ethernet Switch User's Guide
Query
Max Response
Robustness Var

IGMP Interface Configuration

To configure an IGMP Interface on the switch, click on the
IGMP Interface Configuration link under the IP Multicast
Routing Protocols folder:
Web-Based Switch Management
and Enabled. This is used to enable
or disable IGMP Snooping for the
specified VID.
Allows the entry of a value between 1
and 65500 seconds, with a default of
125 seconds.
length of time between sending IGMP
queries.
Sets the maximum amount of time
allowed before sending an IGMP
response report. A value between 1
and 25 seconds can be entered, with
a default of 10 seconds.
A tuning variable to allow for sub-
networks that are expected to lose a
large number of packets. A value
between 2 and 255 can be entered,
with larger values being specified for
sub-networks that are expected to
lose larger numbers of packets.
This specifies the
239