Miele T 1576 VENT ED DRYER Operating Instructions Manual page 15

The lint filter must be cleaned before
or after every program.
^ Open the door and remove the lint
filter.
^ Wipe the lint off the filter with your
hand, do not use any sharp objects!
^ Any lint remaining in the hollow part
of the door can be removed through
the gap at the bottom with a dust
brush or vacuum.
^ Return the lint filter and close the
door.
^ Dry the lint filter before putting it back
in place.
Before cleaning the tumble dryer,
disconnect the machine from the
power supply.
Never use abrasive cleaners,
scouring pads, steel wool or caustic
(oven) cleaners on the dryer. They
will damage the surface.
^ The exterior and the control panel
can be cleaned with warm water and
liquid dish soap applied with a soft
sponge.
^ Wipe dry using a soft cloth.
^ Stainless steel surfaces can be
cleaned using a non-abrasive
stainless steel cleaner.
^ Wipe dry using a soft cloth.
15