Miele S500 Operating Instructions Manual page 39

Check the thread catchers on the
suction inlet of the floor brush, as well
as those on the upholstery nozzle, from
time to time.
Replace the thread catchers if the pile
is worn.
^ Use a knife or similar object to
remove the thread catchers from the
slots.
^ Insert the new thread catchers.
^ Use a coin to release the roller pin
and pull out the pin.
^ Take out the roller.
Remove all threads, hair, etc. and
reassemble the parts.
Spare parts are available from your
Miele dealer or from the Miele Technical
Service Department.
39