Maintenance > Backup And Restore - D-Link DCS-2121 User Manual

MAINTENANCE > Backup and Restore
This screen allows you to save and restore the camera's current configuration. You can also
reset all settings to factory default, and reboot the device.
Save To Local Hard Drive:
Load From Local Hard Drive: To load a saved configuration, click on the Browse... button to
Restore To Factory Defaults: Clicking this button will reset all settings to their factory defaults.
Reboot Device: Clicking the Reboot button will reboot your device
Click on the Save Configuration button to save the current
configuration to a hard drive.
select a configuration file from your hard drive, then click the
Load Configuration button to load the new configuration.
If you choose to reset your settings, you will need to set up your
camera again.
44