D-Link AirPlus Xtreme G DWL-G810 Owner's Manual page 14

Web Configuration (continued)
Wireless (continued)
Channel: Devices communicating in Ad-Hoc mode must be set to the same channel.
WEP Encryption: Select Enable Encryption to use WEP (Wired Equivalent Privacy)
on the network. All devices on the network must share the same WEP selection – either
Enable or Disable, and they must share the same WEP key. The WEP key is generated
from ASCII or Hexadecimal entries that are either 64-bit or 128-bit in length. When
enabling encryption, select the Key Type (ASCII or Hexadecimal) and then input the
appropriate digits or letters. Keys are case sensitive. You can create up to 4 keys.
Select the key you wish to use.
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Tx Rate: Select the transmission rate for the network.
Authentication:
Open System – communicates the key across the network.
Shared Key – devices must have identical WEP settings to communicate.
Click Apply if you have made any changes or additions.
14