D-Link DI-LB604 Owner's Manual page 49

DI-LB604 User's Manual
To hard-reset the DI-LB604 to Factory Default Settings, please do the following:
Locate the Reset button on the back of the DI-LB604.

Use a paper clip to press the Reset button.

 Hold for about 10 seconds and then release.
After the DI-LB604 reboots (this may take a few minutes) it will be reset to the

factory Default settings.
Resetting the DI-LB604 to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may choose
to Reset the DI-LB604 to the factory default settings.
D-Link Systems, Inc.
Troubleshooting
49