D-Link DI-624 Owner's Manual page 25

Using the Configuration Menu
Advanced > Filters > MAC Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network)
computers by their MAC addresses from accessing the Network. You can either manually
add a MAC address or select the MAC address from the list of clients that are currently
connected to the Broadband Router.
Filters-
MAC Filters-
Name-
MAC Address-
DHCP Client-
Select the filter you wish to use; in this case, MAC filters was
chosen.
Choose Disable MAC filters; allow MAC addresses listed be-
low; or deny MAC addresses listed below.
Enter the name here.
Enter the MAC Address.
Select a DHCP client from the pull-down list; click Clone to
copy that MAC Address.
(continued)
25