Operation Mode - Haier HSU-12HEB03 Operation Manual

Operation
Comfortable SLEEP
Operation
Before going to bed,you can simply press the
SLEEP button and unit will operate in SLEEP
mode and bring you a sound sleep.
Use of SLEEP function
After the unit starts, set the operation status,
then press SLEEP button before which the
clock must be adjusted and time being set.

Operation Mode

1. In COOL,DRY mode
1 hours after SLEEP mode starts, temp. will
become 1 C higher than temp. setting. After
O
another 1 hours, temp. rises by 1
The unit will run for further 6 hours then stops
Temp. is higher than temp. setting so that room
temperature won't be too Iow for your sleep.
SLEEP operation starts
1 hr
Rises1
1 hr
Temp.setting
In COOL, DRY mode
2. In HEAT mode
1 hours after SLEEP mode starts, temp will
become 2 C lower than temp.setting. After
O
another 1 hours, temp decrease by 2 C
further. After more another 3 hours, temp.
rises by 1 C further. The unit will run for
O
ON/OFF
FAN
MODE
SWING
TIMER
CLOCK
SET
SLEEP
LOCK
RESET
C further.
O
SLEEP operation stops
Approx.6hrs
Rises 1 C
O
C
O
Unit stop
O
further 3 hours then stops. Temp. is lower
than temp. setting so that room temperature
won't be too high for your sleep.
Temp.setting
1 hr
1 hr
SLEEP
operation starts
3. In AUTO mode
The unit operates in corresponding sleep
mode adapted to the automatically selected
operation mode.
4. In FAN mode
It has no SLEEP function.
5.
When quiet sleeping function is set to 8 hours
the quiet sleeping time can not be adjusted.
When TIMER function is set,the quiet sleeping
function can't be set up .After the sleeping
function is set up,if user resets TIMER function,
the sleeping function will be cancelled; the
machine will be in the state of timing-on,if the
two modes are set up at the same time ,either
of their operation time is ended first ,the unit
will stop automatically,and the other mode will
be cancelled.
.
Power Failure Resume Function
If the unit is started for the first time, the
compressor will not start running unless 3
minutes have elapsed. When the power
resumes after power failure, the unit will run
automatically, and 3 minutes later the
compressor starts running.
Note to the power failure resume:
press the sleep button ten times in five
seconds and enter this function after hearing
four sounds.And press the sleep button ten
times within five seconds and leave this
function after hearing two sounds.
13
Unit stop
Decreases 2 C
O
Decreases 2 C
O
3 hrs
3 hrs
Rises 1 C
O
SLEEP
operation stops
In HEAT mode
,