Table of Contents
Advertisement
DI-1162 Remote Access Router
# ip routing stat (enable/disable)
ip-stat disable
# interface decription (string name)
wan-port-1 WAN SCC 1 Interface
# interface protocol type (0:SLIP, 1:HDLC, 2:SyncPPP,
3:AsyncPPP)
protocol-type 0
# modem initial string (initial string name, SLIP/AsyncPPP
only)
modem-init AT&FS0=1X1
# dial phone number (phone number string, SLIP/AsyncPPP
only)
phone-num 5779110-6403
# baud rate (baud rate, SLIP/AsyncPPP only)
# (0:9600, 1:19200, 2:38400, 3:57600, 4:115200)
baud-rate 0
# port stat (enable/disable)
port-stat disable
# ip address
ip-address 20.19.88.1
# subnet mask
ip-netmask 255.255.255.0
# routing protocol type (0:RIPv1, 1:RIPv2, 2:RIPv1&2)
routing-type 1
# routing operating mode (0:None, 1:Listen, 2:Talk, 3:Both)
operating-mode 2
# ip routing stat (enable/disable)
ip-stat disable
# interface decription (string name)
wan-port-2 WAN SCC 2 Interface
# interface protocol type (0:SLIP, 1:HDLC, 2:SyncPPP,
3:AsyncPPP)
protocol-type 1
# port stat (enable/disable)
port-stat disable
# ip address
ip-address 40.19.88.1
# subnet mask
ip-netmask 255.255.255.0
# routing protocol type (0:RIPv1, 1:RIPv2, 2:RIPv1&2)
routing-type 2
# routing operating mode (0:None, 1:Listen, 2:Talk, 3:Both)
operating-mode 3
# ip routing stat (enable/disable)
ip-stat disable
Appendix E – Configuration File
149
Advertisement
Table of Contents
