Appendix; Installing The Tcp/Ip Protocol - Linksys BEFCMU10 User Manual

Appendix

Installing the TCP/IP Protocol

Follow these instructions to install the TCP/IP Protocol on one of your PCs
only after a network card has been successfully installed inside the PC. These
instructions are for Windows 95, 98 or Milliennium. For TCP/IP setup under
Microsoft Windows NT or 2000, please refer to your Microsoft Windows NT
or 2000 manual.
1. Click the Start button. Choose Settings, then Control Panel.
2. Double-click the
Network icon.
Your Network
window should
pop up. If there is
a line called
TCP/IP for your
Ethernet Adapter
already listed,
there is no need
to do anything
else. If there is
no entry for
TCP/IP, select the
Configuration
tab.
3. Click the Add button.
4. Double-click Protocol.
5. Highlight Microsoft under the list of manufacturers.
20
Instant Broadband Series
TM
EtherFast Cable Modem with USB and Ethernet Connection
®
6. Find and double-click TCP/IP in the list to the right (below).
7. After a few seconds you will be brought back to the main Network win-
dow. The TCP/IP Protocol should now be listed.
8. Click OK. Windows may ask for original Windows installation files.
Supply them as needed (i.e.: D:\win98, D:\win95,
c:\windows\options\cabs.)
9. Windows will ask you to restart the PC. Click Yes.
The TCP/IP Installation is complete.
21