D-Link DWL-P50 Datasheet

DWL-P50
Power over Ethernet Adapter
D-Link, an industry leader in networking, introduces
the DWL-P50 Power over Ethernet (PoE) Adapter.
By using the DWL-P50, both data and electrical
power can be delivered to a non-PoE Ethernet-enabled
device from a single CAT5 Ethernet cable.
The DWL-P50 is simple to install and requires no
tools or software. Multiple DWL-P50 terminal
units complement any PoE injector unit or midspan
switch to provide small to medium business settings
a complete end-to-end PoE solution. In addition,
this unit supports 802.3af ensuring compatibility
with other 802.3af PoE compliant injector units
or midspan switches.
Its compact size makes implementation extremely
easy. During setup, this terminal unit can be set to
power up any compatible 5V or 12V Ethernet-enabled
device via the volt selector located on the back.
2
Deliver Power over Ethernet to
Deliver Power up to 328
(100m) Away
802.3af Compliant Power over
Ethernet
Plug & Play Installation
Adjustable Output Power
Simplifi es Installation for an
Ethernet-based Device
Using the convenience of Power over Ethernet, you
eliminate the need to place an Ethernet-enabled
device, such as a wireless access point or an Internet
camera near a power outlet. Having to manage only
an Ethernet cable simplifi es the physical installation
of the device. You can now mount these devices on
a ceiling or outside, up to 328 feet (100m)
power source.
With PoE, both power and data can be transmitted
using standard Ethernet cabling with virtually no
reduction in data throughput. Use the DWL-P50
with Ethernet-enabled devices where power outlets
are not readily available and with any compatible PoE
power source.

Remote Devices

Feet
1
from a
1