Yamaha TSX-20 Owner's Manual page 11

I Standing the main unit and/or speakers on a surface
You can stand the main unit and/or the speakers on a hard surface at an angle of 45 degrees or 70 degrees using the
supplied stands.
1
Peel off the seals of the non-slip pads and apply them
to the bottom of the main unit and the stands.
Main unit
Non-slip pad
2
Attach the stand to the main unit and/or the speakers
with the screws.
Main unit
Speaker
* The standing angle can be selected as 45 or 70
degrees by attaching the stands upside-down.
70 degrees
Stand
3
Fine adjustment can be made by sliding the position
of a screw within a rectangular hole so that you can
align the main unit and the speakers.
Note
Change the setting of the remote control sensor switch so that the
main unit can receive the remote control signal properly;
● When the switch is set to the HRIZ position, the sensor A is
active.
● When the switch is set to the OTHER position, the sensor B
is active.
B
A
GETTING STARTED
45 degrees
Remote control sensor switch
HRIZ OTHER
9