D-Link Air DWL-700AP Manual page 17

Using the Configuration Utility (continued)
New Password:
Enter the new
password.
Confirm
Password:
Re-enter
the password to
confirm it.
Save Settings:
current system set-
tings can be saved as
a file onto the local
hard drive.
Load Settings:
saved file or any other
saved setting file can
be loaded back on the
access point. To re-
load a system settings
file, click on Browse
to browse the local
hard drive and locate
the system file to be
used. Click Load
when you have selected the file to be loaded back onto the
Reset:
To complete the reset, click Reset.
Restore:
You may also restore the factory settings by clicking on Restore. Make sure
to save the unit's settings before clicking on Restore.
Tools > Admin
Tools > System
The
The
access point.
17