D-Link DWL-122 Manual page 12

Getting Started (continued)
Setting up a Wireless
Install the D-Link Air DWL-122 Wireless USB adapter into the desktop
computer.
installation instructions
Install another DWL-122 into the laptop computer.
(See the Quick Installation Guide included with the product for installation
instructions
Set the wireless configuration for the adapters to Ad-Hoc mode, set
the adapters to the same channel, and assign an IP Address to each
computer on the Ad-Hoc network.
When assigning IP Addresses to the computers on the network, please
remember that the IP Address for each computer must be in the same
IP Address range as all the computers in the network, and the subnet
mask must be exactly the same for all the computers in the network.
For example: If the first computer is assigned an IP Address of 192.168.0.2
with a Subnet Mask of 255.255.255.0, then the second computer can be
assigned an IP Address of 192.168.0.3 with a Subnet Mask of 255.255.255.0,
etc.
IMPORTANT: If computers or other devices are assigned the same IP
Address, one or more of the devices may not be visible on the network.
Ad Hoc Network
(See the Quick Installation Guide included with the product for
.)
.)
IP Address
(See Box below.)
12