Haier ESA3156 - ANNEXE 221 Manual page 18

4
INSTALL OUTER
CASE IN WINDOW
Place outer case in window. Lower
sash until it rests behind front flange
of top rail. Bottom rail must rest
behind window sill.
Top rail
Bottom rail
Curtain assembly cut
away for clarity.
Use two wood screws 31/32" to fix the case to
windows sash. Install left & right installation bracket
and as shown in fig. Install bolt(2
bolt and locknut) to the installation bracket and adjust
them to proper length ,then use 4 (19/32")screws to fix
the bracket on the case.
About
5°
Expand both curtains to contact the
window frame. Install four wood
screws 31/32". Two in each upper right and
left of the curtains.
Install three wood screws 31/32" top mounting rail
screws.
NOTE: To make screws easier to
drive, drill a pilot hole into sash
through clearance hole in curtains.
/ " long flat head
1 2
17