Skype Voicemail - D-Link D DPH-50U DPH-50U Quick User Manual

7.6 Skype Voicemail

With DPH-50U active, the attached telephone handset can be used to check
for, and listen to your Skype voicemail.
When you have a new Skype voicemail that you have not listened to, you
will hear an intermittent beep in the VoIP dial tone.
If you have no new voicemail (i.e. either no voicemail or voicemail that you
have already listened to), the standard VoIP dial tone will be heard.
You can access your voice mail only when there is no call in progress.
In order to access your voicemail:
1. Pick up the attached telephone handset
2. Press '##' to get VoIP dial tone
3. If a new Skype voice message exists the VoIP dial tone will have an
intermittent beep
4. Press '*' to access voice mail mode
5. Once in voice mail mode the first message is played automatically
6. At the end of each message a trailing 'beep" is played
7. At the end of the last messages a trailing 'beep-beep-beep' is played
8. During the playing of current message and within 5 seconds following the
end of message the you can press the 1, 2, 3, 9 in order to perform the
following actions:
9. If you don't enter any valid key within 5 sec after message has ended, the
system will behave as if you pressed '3'
User Action
Repeat current message
Delete current message, move to next
Keep current message, move to next
Delete all messages
To exit voicemail mode press '##" or place the attached telephone in the
handset (i.e. on hook). Alternatively, pressing '#1' will also exit voicemail mode.
In either case, the currently playing message will be stopped.
Key
1
2
3
9