Soundfonts; Configure A Midi Bank - Creative EMU10K1 - Sound Blaster Live! Value User Manual

SoundFonts

Configure a MIDI Bank

Setting the maximum amount of
cache memory for SoundFont files
does not mean setting aside or
reserving the space. The space can
still be used by your computer or
other files, if needed.
Creative SoundFont Control allows you to configure MIDI banks with SoundFont files and instruments,
as well as set the caching algorithm and space.
To configure a MIDI bank:
1. In SoundFont Control, click the Configure Bank
tab.
2. In the Select Bank list, select the MIDI bank to
configure.
3. Click the Load button and load the SoundFont file
you want to the MIDI bank.
The latest file loaded always appears at the top of
the Bank Stack box.
The top of the stack is indicated by an arrow.
4. To replace a SoundFont file, click the file and then
click the Replace button.
OR
Double-click the file, and select the replacement.
5. To clear a bank from the stack, select the bank and
then click the Clear button.
A variation bank can only be cleared by clearing its main bank .
6. Repeat Steps 3, 4 or 5 as required.
By stacking a SoundFont file instead of replacing one with the other, you may return to the original
sounds or use the new selection.
You can "spot" hide particular instruments by loading one or more SoundFont files on top of the
original.
When you clear a SoundFont file, you remove the latest configuration of the main bank and any variation
banks, including the latest configuration of instruments on the Configure Instrument tab page.
Using Sound Blaster Live! Value 18