Table of Contents
Advertisement
MS 150
Specifications
System
Power output
bandwidth
System frequency response
Signal-to-noise ratio ("A" WTG)
Channel separation
Crosstalk between sources
Line-level input sensitivity at 1khz
Loudspeakers
Low-frequency transducers
high-frequency transducers
Nominal impedance
Sensitivity (2.83V/1m)
Frequency response
FM Tuner Section
Frequency range
Usable sensitivity
Signal-to-noise ratio
Distortion
Stereo separation
Selectivity
Image rejection
IF rejection
Tuner output level
Number of presets
RDS capability
30 watts per channel, 20hz – 20khz, ThD
<0.07% into 6 ohms, both channels driven
57hz – 27khz, –6db
65hz – 20khz, ±3db
75db
≥60db
≥60db
1.0V RMS, ±1db
Two 125mm (4-15/16") felted-paper
drivers, ported
Two 19mm (3/4") titanium-laminate domes
6 ohms
87db
80hz – 20khz (±3db)
87.5 – 108.0Mhz
IhF 1.3μV/13.2dbf
Mono/stereo 70/65db
Mono/stereo 0.15/0.3%
35db @ 1khz, 100% deviation @ 65dbf
±300khz: 65db
80db
90db
1khz, ±50khz, Dev 500mV
Six
PTy (program type), PS (program service),
Text (radio text)
CD Section
Disc compatibility
ThD+N (20hz – 20khz)
Frequency response
Channel separation
Signal-to-noise ratio ("A" WTG)
Weight
Video Outputs
Composite video
S-Video
General
Power requirement
Power consumption
Operating temperature
Dimensions (h x W x D)
Weight
Features, specifications and appearance are subject to change without notice.
Please register your product at www.harmankardon.com. you'll need your product's
serial number.
Technical Specifications
CD, CD-R, CD-RW, enhanced CD,
MP3, WMA
<0.01%
0dbr ±0.5
≥65db
>100dbr
22khz filter >100dbr
9kg (19.8 lb)
1.0V (pk-pk), 75 ohms, negative sync
(y) 1.0V (pk-pk), 75 ohms, negative
sync
(C) 0.286V (pk-pk), 75 ohms
DC 24V, 4.9A; 5V, 1A; power supply
works with AC 230V/50hz
<1W standby, 123W maximum
(both channels driven)
0°C to 35°C (32°F to 95°F)
252mm x 488mm x 194mm
(9-5/16" x 19-1/4" x 7-5/8")
8.2kg (18.08 lb)
11
Hide quick links:
Advertisement
Table of Contents
