GE AEM08LP Owner's Manual And Installation Instructions page 5

Features and appearance will vary.
GEAppliances.com
High Low
Cool _ Cool
Low
Fan
0
OFF
MODE
MODE CONTROL
0
Coolest
l:
TEMP
7
1_
2
2/))
_j4
TEM PERATU RE CONTROL
Controls(onsomemodels)
0
Mode Control
High Cool and Low Cool provide cooling with
different fan speeds.
Fan settings provide air circulation and filtering
without cooling.
NOTE:If you move the mode control from a cool
setting to OFF or to a fan setting, wait at least
3 minutes before switching back to a cool
setting.
O TEMP Control
The TEMPcontrol is used to maintain the room
temperature. The compressor will cycle on
and off to keep the room at the same level of
comfort. When you turn the knob to a higher
number, the indoor air will become cooler. Turn
the knob to a lower number and the indoor air
will become warmer.
Cooling Descriptions
For Normal Cooling-Select High Cool or Low
Cool with the TEMPERATURE c ontrol at midpoint.
For Maximum Cooling--Select High Cool with
the TEMPERATURE control at the highest number
available on your knob.
For Quieter and Nighttime Cooling-Select Low
Cool with the TEMPERATURE control at midpoint.