Using The Controls - LG LP0910WNR User's Manual & Installation Instructions

Control panel buttons shown. Operation using the remote control is the same, unless
specifically noted.
1. COOLING MODE
· Press MODE button to choose Cool
mode, the Cool mode indicator will flash.
· Press UP or DOWN button to set room
temperature between 18 to 30 .
· Press SPEED button (or High/Low button)
to select high, low fan speed.
2. AUTOMATIC ADJUSTING MODE
· Press POWER to enter the automatic
adjusting mode when the unit is running for
the first time. When room temperature is
higher than25 , it will come into cool mode.
On the contrary, it will be fan mode. You can
select the fan speed mode and time mode
when it is under automatic adjusting mode.
3. FAN MODE
· Press MODE button (or Fan button) to
choose Fan mode, the Fan mode indicator
will flash.
Select the fan speed by press FAN button
or press High / Low button directly.
· The temperature can not be set.
NOTE
Always point the remote at the sensor. The remote may not work if the
sensor is in bright light or if there is not a clear path between the remote
and the sensor.
10
H O W TO U S E
4. TIME MODE
· When the appliance is switch off, press
Timer button to set timer-on.
· Press Up or Down button to adjust time
from 30 minutes to 24 hours. The Time
on indicator will flash.
· When the appliance is running, press
Timer button to set timer-off.
· Press Up or Down button to adjust time
from 30 minutes to 24 hours. The Time
off indicator will flash.
5. SLEEPING MODE
· Setting sleeping mode, the temperature
will rise 1 after 2 hours, and another 2
hours later, rise 1
· Then it will keep steady and low fan blow.
6. CONINUOUS
· After setting mightiness, the unit will
keep running no matter what temperature
it sets, and E4 E1 E2
works.
High fan blows.
E3 protection