Air Flow Adjustment - Haier HPU-42CV03 Operation And Installation Manual

Operation
Swing louvers
(Vertical louvers)
(Horizontal louvers)
TEMP
ON
OFF
FAN
HEALTH
MODE
SLEEP
SWING
SET
CLOCK
TIMER
HEAT
RESET LIGHT LOCK
Up & down air direction
Press the up & down button once, the LCD aiflow direction will display as follows:
Cooling/Dehumification/airflow:
Remote controller: Position
Heating: Position
Remote controller
Auto:
Remote controller:Position
The up & down flade will move according to the above conditions.
Note: Pay more attention to not cut down the power supply because the flade can't back to the
colse position at this circumstance;
Left & right air direction
Press the Left & right button once , the LCD aiflow direction will display as follows:
Remote controller: Position
The left & right flade will move according to the above conditions
Note: 1. during AUTO mode, pls. don't touch the flade to avoid damaging the inner part of the unit;
2. If the difference between real position & the chart position, press ON/OFF(control panel) button
or ON/OFF( remote controller) button to close the flade and re-open the unit, then it will be normal condition
Up and down
Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
1 2 3
5 4 3 2 1
1 2 3
1 2 3
Side from side
Position 1
Position 2
Position 3
Position 4
Position 5
[COOL/DRY/FA
N/AUTO(COOL)
Position 6
HAVE NOT]
(AUTO SWING)
Position 7
Position 8
4 6
6
4 5 6
4 5 6 7 8
8

Air flow adjustment

(not availble in these nuits)
(not availble in these nuits)
.