Frigidaire GAM155Q1A - GIBSON 15100BTU 115V 12.5A 10.3 SPD 4 WAY AIR DIRECTION Installation Instructions Manual page 5

Extend Window Filler
6
Panels
1. Carefully raise window to expose filler panel locking
screws. Loosen screws so filler panels slide easily.
LOCKING SCREWS
2. Extend panels to fill window opening completely.
Tighten locking screws on top.
3. Close window behind top angle.
Install Window Lock
7
and Sash Seal
1. Trim sash seal to fit window width. Insert into space
between upper and lower sashes.
WINDOW SASH SEAL
2. Attach right angle safety lock as shown.
SAFETY LOCK
3/4''long hex-
head screw
Install Chassis into
8
Cabinet and Install
Front to Unit
1. Lift air conditioner and carefully slide into cabinet
leaving 6" protruding.
2. DO not push on controls OR finned coils.
CAUTION
!
3. Be sure chassis is firmly seated towards rear of cabinet.
4. Installation of front is the reverse of removal outlined
in Section 1.
5