Table of Contents
Advertisement
AV Cable: Connect the AV Cable to the 9-pin connector of the VideoWonder
CardBus Dual
S-Video: S-Video input for external devices like VCRs or camcorders
Audio (L): Connects to the left audio channel of an external audio device
Audio (R): Connects to the right audio channel of an external audio device
Video In: Composite video input for external devices like VCRs or camcorders
Digital TV Antenna: Connects to your home or room antenna or portable antenna
TV Antenna: Connects to your home antenna or cable for Analog TV
2.2 TV Connections
You can use a home TV antenna or the packaged portable antenna for digital TV
reception to connect the digital TV input to the VideoWonder CardBus Dual. Or, you
can use a home TV antenna, cable TV line, or another source for your analog TV
input.
If you use a home TV antenna for both digital and analog TV reception, you may need
to use a signal splitter to connect to the VideoWonder CardBus Dual.
3. Installation
The following sections provide step-by-step instructions on installing and configuring
the card, accessories and software
3.1 Software installation
First, make sure that Windows® XP (Service Pack 1) or Windows® 2000 (Service
pack 4) is installed in your system. If you are not sure what version of Windows you
have, just click the right button of your mouse on "my computer" folder and select
"Properties" to see the version. If your PC is not Windows® 2000 (Service Pack 4)
or Windows® XP (Service Pack 1), please go to "Start" in the menu bar and choose
" Programs", then click " Windows Update" to upgrade your Windows version of
Service Pack 4 for Windows® 2000 or Service Pack 1 for Windows® XP using the
Internet.
for Digital Terrestrial TV
.
This is an example for checking the version of
Windows 2000.
2
English
Digital TV input
Analog TV input
Advertisement
Table of Contents
