Drivers Setup; Auto Run; Installing The Sound Card Driver Under Windows 98/98Se; Installing The Sound Card Driver Under Windows Me - Genius SOUND MAKER VALUE SERIES User Manual

－
PCI Sound Card Sound Maker Value 4.1/5.1 Sound Card
LINE IN
MIC
F-Out
R-Out
＊C/LFE
GAME/MIDI
CD-IN
*A MIDI adapter is required to connect a MIDI instrument to the sound card. The MIDI adapter
can be purchased from your local computer store and is connected to the MIDI/GAME port.
B. Drivers Setup

Auto Run

Auto Run for Windows® 98 / Me / 2000 / XP / NT4.0,
1. Insert the Multimedia Software CD-ROM into your CD-ROM drive.
2. Click "Sound Maker Value 4.1 " or "Sound Maker Value 5.1 " button after entering software control
panel.
3. Click "Install Device Driver and Applications" button.The wizard will lead you to finish all the
installation.
If Auto Run can't be used with your computer, please refer to each Windows as follows,
Installing the Sound Card Driver under Windows
1. After hardware installation has been finished, power up your computer and wait for Windows
95/98/98SE to boot up.
2. The message box will show "Add New Hardware Wizard" and "This Wizard searches for new
drivers for PCI Multimedia Audio Device". Click "Cancel".
3. Insert the Multimedia Software CD-ROM into your CD-ROM drive or DVD-ROM drive.
4. Click "Start" at Windows bottom left corner.
5. Click "Run".
6. Key in the drive and path for drivers/application installation program; for example,
"D:\SMVALUE4.1\SETUP.EXE" or "D:\SMVALUE5.1\SETUP.EXE". (If your CD-ROM drive
or DVD-ROM drive is D)
7. Click "OK" to start the applications/driver installation procedure, and follow the on-screen
instructions to finish the installation.
8. When all the application software has been installed, please restart your computer.
9. Your system will install device drivers automatically.
Installing the Sound Card Driver under Windows
1. After hardware installation has been finished, power up your computer and wait for Windows
to boot up.
This connector provides Line-in function.
This connector provides Microphone-in function.
This connector provides Front sound source output, you can connect one
set of active speaker or headphone.
This connector provides Rear sound source output, you can connect one set
of active speaker or headphone.
This connector provides Center & Subwoofer (LFE) sound source output,
you can connect one set of active speaker.（＊Value 5.1 only）
The 15-pin female connector can be connected to any IBM PC compatible
joystick with a 15-pin D-shell connector and MIDI instrument.
There are two sets of pins, one for Mitsumi standard and the other for Sony
standard.
5
® 98/98SE
®
Me
®
®
Me