Using your camera
Using the camera under water
CAUTION:
The camera does not float. To prevent it from sinking, secure it with the
strap. To keep the camera waterproof, tightly close all doors. Do not open
doors in water or when hands are wet. Waterproof integrity may be
compromised if the camera is dropped. For more information,
page
20.
1 Press the Settings button, then choose Underwater Mode
2 Press
to choose the checkmark, then press OK.
3 Press the Liveview
4 When finished taking underwater videos/pictures, turn Underwater Mode off.
After using the camera in water
Wipe off water or debris. If the camera was used in chemically treated water or
■
saltwater, rinse it in fresh water, then use a soft towel to dry it.
■
If water has entered the camera, remove the battery/card. Allow camera to air-dry
for at least 24 hours before using.
12
button, then take videos/pictures as you normally do.
3 meters (9.8 feet)
.
www.kodak.com/go/support
see