Cpu Configuration - ASROCK P45DE - V1.0 User Manual

3 . 4 . 2 CPU Configuration

3 . 4 . 2 3 . 4 . 2 CPU Configuration CPU Configuration CPU Configuration
3 . 4 . 2 3 . 4 . 2 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode
[Auto]
CPU Frequency (MHz) [333]
PCIE Frequency (MHz) [100]
Boot Failure Guard [Enabled]
[Auto]
Spread Spectrum
Ratio Actual Value 8
[8]
Ratio CMOS Setting
[Disabled]
Enhanced Halt State
[Enabled]
Intel (R) Virtualization tech.
[Enabled]
CPU Thermal Throttling
No-Excute Memory Protection [Disabled]
[Enabled]
Hyper Threading Technology
[Auto]
Intel (R) SpeedStep(tm) tech.
[Disabled]
Intel (R) C-STATE tech.
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual],
[I.O.T.] and [Optimized]. The default value is [Auto]. If you select [Manual],
Untied Overclocking function is enabled. Please refer to page 33 for the details
of Untied Overclocking Technology. Therefore, you are allowed to adjust the
CPU frequency and PCIE frequency in the following two items. If you select
[I.O.T.] (Intelligent Overclocking Technology), the system will automatically
enable the overclocking function when your CPU is heavy loaded.
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This item should always be [Auto] for better system stability.
Ratio Actual Value
This is a read-only item, which displays the ratio actual value of this
motherboard.
Ratio CMOS Setting
If the ratio status is unlocked, you will find this item appear to allow you
changing the ratio value of this motherboard.
Enhance Halt State
All processors support the Halt State (C1). The C1 state is supported
through the native processor instructions HLT and MWAIT and requires no
hardware support from the chipset. In the C1 power state, the processor
maintains the context of the system caches.
Select the over clock
mode.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
4 0 4 0 4 0
4 0 4 0