Table of Contents
Advertisement
2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper
caps over the headers and connectors will cause permanent dam-
age of the motherboard!
Serial ATAII Connectors
(SATAII_1 (Port 0):
see p.2, No. 11)
SATAII_3 (Port 2) SATAII_1 (Port 0)
(SATAII_2 (Port 1):
see p.2, No. 12)
SATAII_4 (Port 3) SATAII_2 (Port 1)
(SATAII_3 (Port 2):
see p.2, No. 13)
(SATAII_4 (Port 3):
see p.2, No. 14)
Serial ATA (SATA)
Data Cable
(Optional)
USB 2.0 Headers
(9-pin USB8_9)
(see p.2 No. 17)
(9-pin USB6_7)
(see p.2 No. 16)
Infrared Module Header
(5-pin IR1)
(see p.2 No. 21)
These four Serial ATAII (SATAII)
connectors support SATA data
cables for internal storage
devices. The current SATAII
interface allows up to 3.0 Gb/s
data transfer rate.
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on this motherboard.
Besides six default USB 2.0
ports on the I/O panel, there are
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
This header supports an
optional wireless transmitting
and receiving infrared module.
ASRock P43DE2 Motherboard
15
15
15
15
15
Advertisement
Table of Contents
