Cpu Configuration - ASROCK K8NF3-VSTA - VERSION 1.0 User Manual

3.3.1 CPU Configuration

3.3.1 3.3.1 CPU Configuration CPU Configuration CPU Configuration
3.3.1 3.3.1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
AGP Frequency (MHz)
Boot Failure Guard
Spread Spectrum
Cool' n' Quiet
Processor Maximum Multiplier
Processor Maximum Voltage
Multiplier/Voltage Change
Memory Clock
Flexibility Option
CAS Latency
TRAS
TRP
TRCD
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Cnfiguration
options: [Auto], [CPU, AGP, Sync.] and [CPU, AGP, Async.].
CPU Frequency (MHz)
Use this option to adjust CPU frequency. The default value is [200].
AGP Frequency (MHz)
Use this option to adjust AGP frequency. The default value is [66].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This feature will be set to [Auto] as default.
Cool 'n' Quiet
Use this item to enable or disable AMD's Cool 'n' Quiet
default value is [Auto]. Configuration options: [Auto], [Enabled] and
[Disabled]. If you install Windows
please set this item to [Enabled]. Please note that enabling this function may
reduce CPU voltage and memory frequency, and lead to system stability or
compatibility issue with some memory modules or power supplies. Please
set this item to [Disable] if above issue occurs.
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Multiplier and Processor Voltage. However, it is recom-
mended to keep the default value for system stability.
If AUTO, multiplier and
[Auto] voltage will be left at the
[200]
rated frequency/voltage. If
[66]
Manual, multiplier and
[Enabled]
voltage will be set based
[Auto]
on User Selection in Setup.
[Auto]
x9 1800 MHz
1.400 V
[Auto]
Select Screen Select Screen
[Auto]
Select Item Select Item
[Disabled]
+- +- Change Option Change Option
[Auto]
F1 F1 General Help General Help
[Auto]
F9 F9 Load Defaults Load Defaults
[Auto]
F10 F10 Save and Exit Save and Exit
[Auto]
ESC ESC Exit Exit
® Vista TM and want to enable this function,
2 8 2 8 2 8 2 8 2 8
TM
technology. The