Oc Tweaker Screen - ASROCK ION 330 - V1.0 User Manual

7.3 7.3 7.3 OC T OC Tweak OC T OC T weaker Screen weak weak er Screen er Screen er Screen
7.3 7.3 OC T weak er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker Advanced
OC Tweaker Settings
Load Optimized CPU OC Setting
Overclock Mode
CPU Frequency (MHz)
Boot Failure Guard
CPU Spread Spectrum
DRAM Frequency
Memory Timings
Memory Bandwidth Boost
Onboard GPU clock
VCORE Voltage
VCCM(DRAM) Voltage
Chipset Core Voltage
Would you like to save current setting as
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Load Optimized CPU OC Setting
You can use this option to load optimized CPU overclocking setting.
Configuration options: [1700MHz], [1800MHz], [1900MHz], [2000MHz] and
[2100MHz]. Please note that overclocing may cause damage to your CPU
and motherboard. It should be done at your own risk and expense.
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Cnfiguration
options: [Auto], [Manual] and [Optimized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
CPU Spread Spectrum
This item should always be [Auto] for better system stability.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [333MHz (DDRII667)] and [400MHz
(DDRII800)].
Memory Timings
Use this item to select Memory Timings. The default value is [Auo].
Memory Bandwidth Boost
Use this item to enable or disable Memory Bandwidth Boost. The default
value is [Auo].
Onboard GPU Clock
This allows you to adjust Onboard GPU Clock feature. Configuration options:
[Auto] and [Manual]. The default value is [Auo].
BIOS SETUP UTILITY
H/W Monitor Boot Security
Overclocking may cause
[Press Enter]
damage to your CPU and
motherboard.
[Auto]
It should be done at
[133]
your own risk and
[Enabled]
expense.
[Auto]
[Auto]
[Auto]
[Disabled]
Select Screen
[Auto]
Select Item
[Auto] Enter Go to Sub Screen
[Auto] F1 General Help
[Auto] F9 Load Defaults
F10 Save and Exit
ESC Exit
Exit
3 7 3 7 3 7
3 7 3 7