Installation Of Heatsink And Cpu Fan; Installation Of Memory Modules (Dimm) - ASROCK GE PRO-HT User Manual

Hide thumbs Also See for GE PRO-HT:

Table of Contents

The CPU fits only in one correct orientation. DO NOT force the

CPU into the socket to avoid bending of the pins.

Step 4.

When the CPU is in place, press it firmly on the socket while you push

down the socket lever to secure the CPU. The lever clicks on the side tab

to indicate that it is locked.

Step 1

2.4 Installation of CPU Fan and Heatsink

Intel

Pentium

grease between the CPU and the heatsink is also needed to improve heat

transfer. Make sure that the CPU and the heatsink are securely fastened and

in good contact with each other. For proper installation, please kindly

refer to the instruction manuals of vendors of CPU fan and heatsink.

SDRAM (Synchronous DRAM) DIMM (Dual In-line Memory Module) has 168 pinsand

DDR (Double Data Rate) SDRAM DIMM has 184 pins.

Please make sure to disconnect power supply before adding

or removing DIMMs or the system components.

168-pin RAM

The 168-pin SDRAM DIMM slot (black) and 184-pin DDR DIMM slot (blue) can be easily

distinguished by the fool-proof design.

Please do not use both 168-pin SDRAM DIMM and 184-pin

DDR DIMM at the same time. To optimize the compatibility, it

is not recommended to use two different models of the DIMMs

at the same time.

Step 2, 3

4 CPU requires larger heatsink and cooling fan. Thermal

Step 4

184-pin RAM

Table of Contents

Ge pro-m