Optical Drive - ASROCK MultiBook F14 User Manual

Table of Contents

Advertisement

Optical Drive

Inserting an optical disc
1. While the Notebook PC's power is ON,
press the drive's eject button and the tray
will eject out partially.
3. Hold the disc by the edge and face the
disc's printed side up. Push down on
both sides of the disc's center until the
disc snaps onto the hub. The hub should
be higher than the disc when correctly
mounted.
NOTE: It is normal to hear as well as feel the disc spinning with great intensity in the
optical drive while data is read.
Using the Notebook PC
2. Gently pull on the drive's front panel and
slide the tray completely out. Be careful
not to touch the drive lens and other
mechanisms. Make sure there are no
obstructions that may get jammed under
the drive's tray.
4. Slowly push the drive's tray back in.
The drive will begin reading the table of
contents (TOC) on the disc. When the
drive stops, the disc is ready to be used.
4
31

Advertisement

Table of Contents
loading

Table of Contents