ASROCK AM2NF4G-SATA2 User Manual page 28

Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
CPU Spread Spectrum
This feature will be set to [Center Spread] as default. Configuration
options: [Disabled], [Center Spread], and [Down Spread].
PCIE Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled], and [Enabled].
HT Spread Spectrum
This feature will be set to [Center Spread] as default. Configuration
options: [Disabled], [Center Spread], and [Down Spread].
Cool 'n' Quiet
Use this item to enable or disable AMD's Cool 'n' Quiet
Dual Core Support
This item will show if you use Dual Core CPU. Configuration optiona: [Enabled],
[Disabled]. The default value is [Enabled].
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Multiplier and Processor Voltage. However, it is recom-
mended to keep the default value for system stability.
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
CPU Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
HT Spread Spectrum
Cool' n' Quiet
Dual Core Support
Processor Maximum Multiplier
Processor Maximum Voltage
Multiplier/Voltage Change
Processor Multiplier
Processor Voltage
Memory Clock
Flexibility Option
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Processor Multiplier
This item will show when "Multiplier/Voltage Change" is set to [Manual];
otherwise, it will be hidden. You may set the value from [x8] up to [x25] but
If AUTO, multiplier and
[Auto]
voltage will be left at the
[200]
rated frequency/voltage. If
[100]
Manual, multiplier and
[Enabled]
voltage will be set based
[Center Spread]
[Enabled] on User Selection in Setup.
[Enabled]
[Center Spread]
[Enabled]
[Enabled]
x11 Select Screen Select Screen
1.550 V
Select Item Select Item
[Manual]
+- +- Change Option Change Option
F1 F1 General Help General Help
[x8]
F9 F9 Load Defaults Load Defaults
[1.500V]
F10 F10 Save and Exit Save and Exit
[Auto]
ESC ESC Exit Exit
[Disabled]
2 8 2 8 2 8 2 8 2 8
TM technology.