Chipset Configuration - ASROCK AM2NF3-VSTA User Manual

Hide thumbs Also See for AM2NF3-VSTA:
Table of Contents

Advertisement

3.3.2
3.3.2
3.3.2

Chipset Configuration

Chipset Configuration
Chipset Configuration
3.3.2
3.3.2
Chipset Configuration
Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Settings
OnBoard UAA Audio
OnBoard LAN
AGP Data Rate
AGP Aperture Size
AGP Fast Write
AGP SideBand Address
Primary Graphics Adapter
CPU-NB Link Speed
CPU-NB Kink Width
DRAM Voltage
AGP Voltage
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
OnBoard LAN
This allows you to enable or disable the onboard LAN feature.
OnBoard UAA Audio
Select [Auto], [Enabled] or [Disabled] for the onboard UAA Audio feature. If
you select [Auto], the onboard UAA Audio will be disabled when PCI Sound
Card is plugged.
AGP Data Rate
Use this item to adjust the AGP Data Rate. Configuration options: [8X], [4X].
The default value is [8X].
AGP Aperture Size
It refers to a section of the PCI memory address range used for graphics
memory. It is recommended to leave this field at the default value unless the
installed AGP card's specifications requires other sizes. Configuration
options: [32MB], [64MB], [128MB], [256MB], and [512MB].
AGP Fast Write
This allows you to enable or disable the feature of AGP fast write protocol
support.
AGP SideBand Address
This allows you to enable or disable the feature of AGP SideBand Address.
Configuration options: [Enabled], and [Disabled].
Primary Graphics Adapter
This item will switch the PCI Bus scanning order while searching for video
card. It allows you to select the type of Primary VGA in case of multiple
video controllers. The default value of this feature is [PCI]. Configuration
options: [PCI] and [AGP].
CPU - NB Link Speed
This feature allows you selecting CPU to NB link frequency. Configuration
options: [Auto], [200 MHz], [400 MHz], [600 MHz], and [800 MHz].
To set DRAM Voltage.
[Auto]
[Enabled]
[4X]
[64MB]
[Disabled]
[Enabled]
[PCI]
Select Screen
[Auto]
Select Item
[Auto]
+ -
Change Option
[Auto]
F1
General Help
[Auto]
F9
Load Defaults
F10
Save and Exit
ESC
Exit
3 0
3 0
3 0
3 0
3 0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Am2nf3-vsta - v1.2

Table of Contents