ASROCK A790GMH-128M Installation Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. A790GMH128M
  6. Installation manual
ASROCK A790GMH-128M Installation Manual

ASROCK A790GMH-128M Installation Manual

Hide thumbs Also See for A790GMH-128M:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2009 ASRock INC. All rights reserved.
ASRock
Published August 2009
A790GMH/128M
Motherboard
1 1 1 1 1

Advertisement

Table of Contents
loading

Related Manuals for ASROCK A790GMH-128M

Summary of Contents for ASROCK A790GMH-128M

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

  • Page 2: Motherboard Layout

    (HD_AUDIO1, Lime) Southbridge Controller Infrared Module Header (IR1) Chassis Fan Connector (CHA_FAN1) PCI Slots (PCI1- 2) Fourth SATAII Connector (SATAII_4 (PORT 3)) 31 PCI Express 2.0 x16 Slot (PCIE2; Green) Third SATAII Connector (SATAII_3 (PORT 2)) Northbridge Controller Secondary SATAII Connector PCI Express 2.0 x1 Slot (PCIE1;...
  • Page 3 Line In (Light Blue) PS/2 Keyboard Port (Purple) ** 8 Front Speaker (Lime) * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications ACT/LINK...
  • Page 4 To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find “VIA HD Audio Deck” tool on your system. Please follow below instructions according to the OS you install.

  • Page 5: Package Contents

    ASRock’s commit- ment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.

  • Page 6: Specifications

    - Solid Capacitor for CPU power - Support for Socket AM2+ / AM2 processors: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon X2 Dual-Core / Athlon 64 / Sempron processor - Support for AM3 processors: AMD Phenom...
  • Page 7 - 1 x Optical SPDIF Out Port - 4 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - HD Audio Jack: Side Speaker/Rear Speaker/Central/Bass/ Line in/Front Speaker/Microphone (see CAUTION 7) Connector - 6 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0,...
  • Page 8 Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
  • Page 9 USB flash drive or hard drive must use FAT32/16/12 file system. 13. The software name itself – OC DNA literally tells you what it is capable of. OC DNA, an exclusive utility developed by ASRock, provides a conve- nient way for the user to record the OC settings and share with others.
  • Page 10 16. This motherboard supports ASRock AM2 Boost overclocking technology. If you enable this function in the BIOS setup, the memory performance will improve up to 12.5%, but the effect still depends on the AM2 CPU you adopt. Enabling this function will overclock the chipset/CPU reference clock. However, we can not guarantee the system stability for all CPU/DRAM configurations.
  • Page 11 Vista or Windows Vista * If you need to use CyberLink PowerDVD Ultra version 7.3, we suggest to disable Hardware Acceleration function for better playback performance and compatibility. After executing CyberLink PowerDVD Ultra program, please follow below steps to disable Hardware Acceleration function.
  • Page 12 1 . 4 1 . 4 1 . 4 P P P P P assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD assed 1080p Blu-ray (BD) / HD-D -D -D...

  • Page 13: Pre-Installation Precautions

    Installation Installation Installation This is a Micro ATX form factor (9.6-in x 8.6-in, 24.4 cm x 21.8 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions...

  • Page 14: Installation Of Cpu Fan And Heatsink

    Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
  • Page 15 (the same brand, speed, size and chip-type) DDR2 DIMM pair in the slots of the same color. In other words, you have to install identical DDR2 DIMM pair in Dual Channel A (DDRII_1 and DDRII_2; Yellow slots;...

  • Page 16: Installing A Dimm

    Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

  • Page 17: Expansion Slots (Pci And Pci Express Slots)

    2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 (PCIE x1 slot;...

  • Page 18: Dual Monitor And Surround Display Features

    VGA card to this motherboard. This motherboard also provides independent display controllers for DVI-D, D-Sub or HDMI to support dual VGA output so that DVI-D, D-sub or HDMI can drive same or different display contents.
  • Page 19 [512MB] to enable the function of VGA/D-sub. Please make sure that the value you select is less than the total capability of the system memory. If you do not adjust the BIOS setup, the default value of “Share Memory”, [Auto], will disable VGA/D-Sub function when the add-on VGA card is inserted to this motherboard.
  • Page 20 G. Repeat steps C through E for the diaplay icon identified by the number one, two, three and four. ® For Windows Vista / Vista 64-bit OS: Right click the desktop, choose “Personalize”, and select the “Display Settings” tab so that you can adjust the parameters of the multi-monitor according to the steps below.
  • Page 21 VGA driver installed in your system. Step 5. Install the onboard VGA driver from our support CD to your system for both the onboard VGA and the discrete graphics card. Step 6. Restart your computer. Then you will find “ATI Catalyst Control Center” on ®...
  • Page 22 * Hybrid CrossFireX appearing here is a registered trademark of ATI Technologies Inc., and is used only for identification or explanation and to the owners’ benefit, without intent to infringe. * For further information of ATI Hybrid CrossFireX technology, please check AMD website for up dates and details.

  • Page 23: Jumpers Setup

    After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS.

  • Page 24: Onboard Headers And Connectors

    Floppy Connector (33-pin FLOPPY1) (see p.2 No. 25) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No. 9)
  • Page 25 USB 2.0 Headers Besides four default USB 2.0 ports on the I/O panel, there are (9-pin USB10_11) three USB 2.0 headers on this (see p.2 No. 23) motherboard. Each USB 2.0 header can support two USB 2.0 ports. (9-pin USB8_9) (see p.2 No.
  • Page 26 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.
  • Page 27 (see p.2 No. 8) Though this motherboard provides 24-pin ATX power connector, it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13.

  • Page 28: Installing Windows

    2 . 9 Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers.

  • Page 29: Untied Overclocking Technology

    ” page, please insert the ASRock Support CD into your optical drive, and click the “Load Driver” button on the left on the bottom to load the AMD AHCI drivers. AMD AHCI drivers are in the following path in our Support CD:...

  • Page 30: Bios Information

    CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double- click on the file “ASSETUP.EXE” from the “BIN” folder in the Support CD to display the menus.
  • Page 31 Wir danken Ihnen für den Kauf des ASRock A790GMH/128M Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.

  • Page 32: Spezifikationen

    1 . 2 Spezifikationen Spezifikationen Plattform - Micro ATX-Formfaktor: 24.4 cm x 21.8 cm; 9.6 Zoll x 8.6 Zoll - Festkondensator für CPU-Leistung - Unterstützung für Socket AM2+ / AM2-Prozessoren: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dualkern / Athlon X2 Dualkern / Athlon 64 / Sempron-Prozessor - Unterstützung von AM3-Prozessoren: AMD Phenom...
  • Page 33 - 1 x HDMI port - 1 x optischer SPDIF-Ausgang - 4 x Standard-USB 2.0-Anschlüsse - 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED) - HD Audiobuchse: Lautsprecher seitlich / Lautsprecher hinten / Mitte/Bass / Audioeingang/ Lautsprecher vorne / Mikrofon (siehe VORSICHT 7) Anschlüsse...
  • Page 34 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 35 Information. 1080p Blu-ray (BD)/HD-DVD Playback Unterstützung auf dieser Hauptplatine fordert die passende Hardwarekonfiguration. Bitte verweisen Sie auf Seite 11 und 12 für minimal Hardware Anforderung und die überschritten 1080p Blu-ray (BD)/HD-DVD Filme in unserem Laborversuch. Der Mikrofoneingang dieses Motherboards unterstützt Stereo- und Mono- Modi.
  • Page 36 USB-Flash-Laufwerk oder die Festplatte das Dateisystem FAT32/16/12 benutzen muss. 13. Allein der Name – OC DNA* – beschreibt es wörtlich, was die Software zu leisten vermag. OC DNA ist ein von ASRock exklusiv entwickeltes Dienstprogramm, das Nutzern eine bequeme Möglichkeit bietet, Übertaktungseinstellungen aufzuzeichnen und sie Anderen mitzuteilen.

  • Page 37: Installation

    2. Installation 2. Installation 2. Installation Dies ist ein Motherboard mit einem Micro ATX-Formfaktor (9,6 Zoll x 8,6 Zoll, 24,4 cm x 21,8 cm). Vor Installation des Motherboards müssen Sie die Konfiguration Ihres Gehäuses dahingehend überprüfen, ob das Motherboard dort hineinpasst.
  • Page 38 2.1 CPU Installation 2.1 CPU Installation Schritt 1: Öffnen Sie den CPU-Sockel, indem sie den Hebel leicht zur Seite und dann nach oben ziehen, auf einen Winkel von 90°. Schritt 2: Positionieren Sie die CPU genau so über dem Sockel, dass sich die Ecke der CPU mit dem goldenen Dreieck exakt über der Ecke des...
  • Page 39 Steckplätzen gleicher Farbe installieren. Mit anderen Worten, sie müssen ein identisches DDR2 DIMM-Paar im Dual-Kanal A (DDRII_1 und DDRII_2; gelbe Steckplätze, siehe Seite 2 Nr. 6) oder ein identisches DDR2 DIMM-Paar im Dual- Kanal B (DDRII_3 und DDRII_4; orange Steckplätze, siehe Seite 2 Nr. 7) installieren, damit die Dual-Kanal-Speichertechnologie aktiviert werden kann.
  • Page 40 Öffnen Sie einen DIMM-Slot, indem Sie die seitlichen Clips nach außen drücken. Schritt 2: Richten Sie das DIMM-Modul so über dem Slot aus, dass das Modul mit der Kerbe in den Slot passt. Die DIMM-Module passen nur richtig herum eingelegt in die Steckplätze.
  • Page 41 Gehäuseschacht (Slot) , den Sie nutzen möchten und behalten die Schraube für den Einbau der Karte. Schritt 3: Richten Sie die Karte über dem Slot aus und drücken Sie sie ohne Gewalt hinein, bis sie den Steckplatz korrekt ausfüllt. Schritt 4: Befestigen Sie die Karte mit der Schraube aus Schritt 2.

  • Page 42: Einstellung Der Jumper

    Überbrücken Sie Pin2, Pin3, um +5VSB (Standby) zu setzen (siehe S.2, No. 1) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. CMOS löschen (CLRCMOS1, 3-Pin jumper) Default- CMOS (siehe S.2, No.
  • Page 43 (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2, No. 25) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) (39-pin IDE1, siehe S.2, No. 9)
  • Page 44 USB 2.0-Header Zusätzlich zu den vier üblichen USB 2.0-Ports an den (9-pol. USB10_11) I/O-Anschlüssen befinden sich (siehe S.2 - No. 23) drei USB 2.0-Anschlussleisten am Motherboard. Pro USB 2.0- Anschlussleiste werden zwei USB 2.0-Ports unterstützt. (9-pol. USB8_9) (siehe S.2 - No. 21) (9-pol.
  • Page 45 Front-Audioanschlussleiste: A. Schließen Sie Mic_IN (MIC) an MIC2_L an. B. Schließen Sie Audio_R (RIN) an OUT2_R und Audio_L (LIN) an OUT2_L C. Schließen Sie Ground (GND) an Ground (GND) an. D. MIC_RET und OUT_RET sind nur für den HD-Audioanschluss gedacht.
  • Page 46 Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss bietet, kann es auch mit einem modifizierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. Installation eines 20-pol. ATX-Netzteils Anschluss für...

  • Page 47: Installation Von Windows

    Anschließend werden die mit Ihrem System kompatiblen Treiber automatisch erkannt und auf dem Bildschirm angezeigt. Zur Installation der nötigen Treiber gehen Sie bitte der Reihe nach von oben nach unten vor. Nur so können die von ßen Ihnen installierten Treiber richtig arbeiten.
  • Page 48 System. ® Legen Sie Windows Vista / Vista 64-Bit optische Disc in das optische Laufwerk ein, um Ihr System zu starten. Folgen Sie anschließend den Anweisungen, um das Windows ® Vista / Vista 64-Bit Betriebssystem auf Ihrem System zu installieren.

  • Page 49: Untied Overclocking Technology

    Dieses Motherboard unterstützt die Entkoppelte Übertaktungstechnologie, durch die der FSB durch fixierte PCI-/PCIE-Busse beim Übertakten effektiver arbeiten. Bevor Sie die Entkoppelte Übertaktung aktivieren, stellen Sie bitte die Option “Overclock Mode” (Übertaktungsmodus) im BIOS von [Auto] auf [CPU, PCIE, Async.] um. Dadurch wird der CPU-FSB beim Übertakten entkoppelt, PCI- und PCIE-Busse werden jedoch fixiert, so dass der FSB in einer stabileren Übertaktungsumgebung arbeiten kann.
  • Page 50 Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.

  • Page 51: Contenu Du Paquet

    Contenu du paquet Contenu du paquet Carte mère ASRock A790GMH/128M (Facteur de forme Micro ATX: 9.6 pouces x 8.6 pouces, 24.4 cm x 21.8 cm) Guide d’installation rapide ASRock A790GMH/128M CD de soutien ASRock A790GMH/128M Un câble ruban IDE Ultra ATA 66/100/133 80 conducteurs Deux câble de données Serial ATA (SATA) (Optionnelle)
  • Page 52 / Athlon X2 Dual-Core / Athlon 64 / processeur Sempron - Prise en charge des processeurs sur AM3: Processeur Phenom II X4 / X3 / X2 et Athlon II X4 / X3 / X2 d’AMD - Prise en charge d’AMD OverDrive avec fonction ACC (Advanced Clock Calibration ou calibrage d’horloge avancé)
  • Page 53 - 6 x connecteurs SATAII, prennent en charge un taux de transfert de données pouvant aller jusqu’à 3.0Go/s, supporte RAID (RAID 0, RAID 1, RAID 5, RAID 10 et JBOD), NCQ, AHCI et “Hot-Plug” (Connexion à chaud) (voir ATTENTION 8) - 1 x ATA133 IDE connecteurs (prend en charge jusqu’à...
  • Page 54 - FCC, CE, WHQL - Prêt pour EuP (alimentation Prêt pour EuP requise) (voir ATTENTION 17) * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou...
  • Page 55 3 pour effectuer la bonne connexion. Avant d’installer le disque dur SATAII au connecteur SATAII, veuillez lire le Guide « Installation du disque dur SATAII » à la page 31 du « Manuel de l’utilisateur » qui se trouve sur le CD de support pour régler votre lecteur de disque dur SATAII au mode SATAII.
  • Page 56 12. O ASRock Instant Flash é um utilitário de flash do BIOS incorporado na memória Flash ROM. Esta prática ferramenta de actualização do BIOS permite-lhe actualizar o BIOS do sistema sem necessitar de entrar nos sistemas operativos, como o MS-DOS ou o Windows ®...
  • Page 57 2. Installation 2. Installation Il s’agit d’une carte mère à facteur de forme Micro ATX (9,6 po x 8,6 po, 24,4 cm x 21,8 cm). Avant d’installer la carte mère, étudiez la configuration de votre châssis pour vous assurer que la carte mère s’y insère.
  • Page 58 Etape 1. Déverrouillez le support en relevant le levier selon un angle de 90 Etape 2. Placer l’UC directement au-dessus de la prise pour que le coin de l’UC avec son triangle jaune coïncide avec le petit triangle dans le coin de la prise.
  • Page 59 Double. Pour effectuer une configuration à canal double, vous devez toujours installer des paires de DIMM DDR2 identiques (de la même marque, de la même vitesse, de la même taille et du même type de puce) dans les slots de même couleur. En d’autres termes, vous devez installer une paire de DIMM DDR2 identiques dans le Canal Double A (DDRII_1 et DDRII_2;...
  • Page 60 Si vous adoptez des modules de mémoire DDR2 1066 sur cette carte mère, il est recommandé de les installer dans les fentes DDRII_3 et DDRII_4. Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM...

  • Page 61: Installation D'une Carte D'extension

    Slot d’extension (Slots PCI et Slots PCI Express) Slot d’extension (Slots PCI et Slots PCI Express) Il y a 2 ports PCI et 2 ports PCI Express sur la carte mère A790GMH/128M. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Page 62 Toutefois, veuillez ne pas effacer la CMOS tout de suite après avoir mis le BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant de procéder à...
  • Page 63 (voir p.2 fig. 25) Broche1 Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) (IDE1 br. 39, voir p.2 No. 9)
  • Page 64 En-tête USB 2.0 A côté des quatre ports USB 2.0 par défaut sur le panneau (USB10_11 br.9) E/S, il y a trois embases USB (voir p.2 No. 23) 2.0 sur cette carte mère. Chaque embase USB 2.0 peut prendre en charge 2 ports USB (USB8_9 br.9)
  • Page 65 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système.
  • Page 66 (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur. Si vous prévoyez de connecter le ventilateur de CPU à 3 broches au connecteur du ventilateur de CPU sur cette carte mère, veuillez le...
  • Page 67 XP / XP 64-bit / Vista / Vista 64-bit OS sur votre lecteur de disque dur SATA / SATAII avec les fonctions RAID, veuillez vous référer au document de l’étape suivante sur le CD de support pour connaître la procédure détaillée: ..\ RAID Installation Guide (Guide d’installation RAID)
  • Page 68 à gauche pour charger les pilotes AHCI AMD. Les pilotes AHCI AMD sont sous le chemin suivant du CD Support: (IL y a deux ASRock Support CD dans le paquet de boite de cadeau de la carte mere, veuilliez selectionner un pour Windows ®...

  • Page 69: Informations Sur Le Cd De Support

    BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.
  • Page 70 Grazie per aver scelto una scheda madre ASRock A790GMH/128M, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Page 71 Processore - Supporto per processori Socket AM2+ / AM2: AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2 Dual-Core / Athlon X2 Dual-Core / Athlon 64 / processore Sempron - Supporto di processori AM3: AMD Phenom...
  • Page 72 - 1 x Porta HDMI - 1 x Porta ottica SPDIF Out - 4 x porte USB 2.0 già integrate - 1 x porte LAN RJ-45 con LED (LED azione/collegamento e LED velocità) - Connettore HD Audio: cassa laterale / cassa posteriore / cassa...
  • Page 73 * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può...
  • Page 74 Il supporto per riproduzione 1080p Blu-ray (BD) / HD-DVD sulla scheda madre richiede una corretta configurazione hardware. Prego fare riferimento alla pagina 11 ed 12 per i requisiti minimi hardware e per il test 1080p Blu-ray (BD) / HD-DVD del nostro laboratorio.
  • Page 75 (dischi floppy) o altre complicate utilità Flash. Si prega di notare che l’unità Flash USB o il disco rigido devono usare il File System FAT32/16/ 13. Il nome stesso del software – OC DNA – dice di cosa è capace. OC DNA, una utilità esclusiva sviluppata da ASRock, fornisce un modo comodo per registrare le impostazioni OC e condividerle con gli altri.
  • Page 76 2. Installazione Questa è una scheda madre con Form Factor Micro ATX (9.6 pollici x 8.6 pollici; 24,4 cm x 21,8 cm). Prima di installare la scheda madre, studiare la configurazione del telaio per assicurarsi che la scheda madre vi si adatti.
  • Page 77 2.1 Installazione del processore Step 1. Aprire lo zoccolo sollevando la leva da un angolo di 90°. Step 2. Posizionare la CPU direttamente sopra la presa in modo tale che l’angolo della CPU con il triangolo dorato corrisponda all’angolo della presa con il triangolino.
  • Page 78 2.3 Installazione dei moduli di memoria (DIMM) La scheda madre A790GMH/128M fornisce quattro alloggiamenti DIMM DDR2 (Double Data Rate 2) a 240 pin, e supporta la tecnologia Dual Channel Memory. Per la configurazione a due canali, è necessario installare sempre coppie identiche (stessa marca, velocità, dimensioni e tipo di chip) di DIMM DDR2 negli alloggiamenti dello...
  • Page 79 Sbloccare lo slot DIMM premendo i fermi che lo trattengono verso l’esterno. Step 2. Allineare una DIMM sullo slot così che il pettine della DIMM combaci con la sua sede sullo slot. La DIMM può essere montata correttamente soltanto con un orientamento.
  • Page 80 Step 2. Rimuovere i ganci sullo slot che si intende utilizzare. Tenere a portata di mano le viti. Step 3. Allineare il connettore della scheda con lo slot e premere con decisione finché...
  • Page 81 Quando il ponticello è posizionato sui pin, il jumper è “CORTOCIRCUITATO”. Se sui pin non ci sono ponticelli, il jumper è “APERTO”. L’illustrazione mostra un jumper a 3 pin in cui il pin1 e il pin2 sono “CORTOCIRCUITATI” quando il ponticello è CORTOCIRCUITATO APERTO posizionato su questi pin.
  • Page 82 (33-pin FLOPPY1) (vedi p.2 item 25) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) (39-pin IDE1, vedi p.2 Nr. 9)
  • Page 83 Collettore USB 2.0 Oltre alle quattro porte USB 2.0 predefinite nel pannello I/O, la (9-pin USB10_11) scheda madre dispone di tre (vedi p.2 No. 23) intestazioni USB 2.0. Ciascuna intestazione USB 2.0 supporta due porte USB 2.0. (9-pin USB8_9) (vedi p.2 No. 21) (9-pin USB6_7) (vedi p.2 No.
  • Page 84 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 85 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 86 64 bit con funzioni RAID 64 bit con funzioni RAID 64 bit con funzioni RAID 64 bit con funzioni RAID Se sugli HDD SATA / SATAII con funzione RAID si vuole installare il sistema operativo ® Windows XP / XP 64-bit / Vista...
  • Page 87 Windows?” (Dove si vuole eseguire l’istallazione di Windows), inserire il CD di supporto ASRock nell’unità ottica e fare clic sul pulsante “Carica driver” , in basso a sinistra, per caricare i driver AMD AHCI. I driver AMD AHCI si trova sul seguente...
  • Page 88 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. El BIOS Setup Utility es diseñádo “user-friendly”.
  • Page 89 ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 90 Athlon X2 Dual-Core, Athlon 64 y procesador Sempron - Compatibilidad con procesadores con AM3: procesador AMD Phenom II X4 / X3 / X2 y Athlon II X4 / X3 / X2 - Compatible con AMD OverDrive con la función ACC (Calibración...
  • Page 91 - 6 x conexiones SATAII, admiten una velocidad de transferencia de datos de hasta 3,0Gb/s, soporta RAID (RAID 0, RAID 1, RAID 5, RAID 10 y JBOD), NCQ, AHCI y “Conexión en caliente” (vea ATENCIÓN 8) - 1 x ATA133 conexiones IDE (admite hasta 2 dispositivos...
  • Page 92 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 93 El apoyo de la reproducción de Blu-rayo de 1080p (BD) / HD-DVD en esta placa base requiere la configuración de hardware apropiada. Por favor refieren a la página 11 y 12 para el requisito mínimo de hardware y las películas de Blu-rayo de 1080p (BD) / HD-DVD pasado en nuestra prueba del laboratorio.
  • Page 94 ASRock Instant Flash. Ejecute esta herramienta y guarde el archivo correspondiente al sistema BIOS nuevo en su unidad flash USB, unidad de disco flexible o disco duro para poder actualizar el BIOS con sólo pulsar un par de botones, sin necesidad de preparar un disco flexible adicional ni utilizar complicadas utilidades de programación.

  • Page 95: Instalación

    2. Instalación 2. Instalación Esta placa base tiene un factor de forma Micro ATX (9,6 pulgadas x 8,6 pulgadas, 24,4 cm. x 21,8 cm). Antes de instalar la placa base, estudie la configuración de su chasis para asegurarse de que la placa base cabe en él.

  • Page 96: Instalación Del

    Paso 3. Coloque cuidosamente el CPU en el zócalo. El CPU se encaja al zócalo a una sola orientación. No esfuerce el CPU en el zócalo para prevenir encorvados de los pins del CPU. Si no puede encajar el CPU, examine su orientación o examine si los pins están ya...

  • Page 97: Instalación De Memoria

    DDR2 DIMM de Doble Canal A (DDRII_1 y DDRII_2; Ranuras Amarillas; consulte la p. 2 N. 6) o pares idénticos DDR2 DIMM en el Doble Canal B (DDRII_3 y DDRII_4; Ranuras Anaranjado; consulte p.2 N.7), de modo que pueda activarse la Tecnología de Memoria de Doble Canal.
  • Page 98 Asegúrese de desconectar la fuente de alimentación antes de añadir o retirar módulos DIMM o componentes del sistema. Paso 1. Empuje los clips blancos de retención por el extremo de cada lado de la ranura de memoria. Paso 2. Encaje la muesca del DIMM hacia la cumbrera de la ranura.
  • Page 99 Paso 2. Quite la tapa que corresponde a la ranura que desea utilizar. Paso 3. Encaje el conector de la tarjeta a la ranura. Empuje firmemente la tarjeta en la ranura. Paso 4. Asegure la tarjeta con tornillos.
  • Page 100 3 para habilitar +5VSB (vea p.2, No. 1) (standby) para PS/2 o USB wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Limpiar CMOS (CLRCMOS1, jumper de 3 pins) (ver p.2, No.
  • Page 101 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) (39-pin IDE1, vea p.2, No. 9)
  • Page 102 Cabezal USB 2.0 Además de cuatro puertos USB 2.0 predeterminados en el (9-pin USB10_11) panel de E/S, hay tres bases (ver p.2, No. 23) de conexiones USB 2.0 en esta placa base. Cada una de estas bases de conexiones (9-pin USB8_9) admite dos puertos USB 2.0.
  • Page 103 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L.
  • Page 104 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos...
  • Page 105 XP 64 bits, Windows Vista , Windows Vista 64 bits en sus HDDs SATA / SATAII y sin funciones RAID, siga los procedimientos que se indican a continuación en función del sistema operativo que tenga instalado. 2.10.1 Instalación de Windows 2.10.1 Instalación de Windows...
  • Page 106 AHCI de AMD se encuentran en la siguiente ruta de nuestro CD de soporte: (Hay dos CD del Apoyo de ASRock en el paquete de la caja del regalo de la placa ® base, por favor elige uno para Windows...
  • Page 107 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora.
  • Page 108 é dotada de um projeto robusto que atende a ASRock de compromisso com a qualidade e durabilidade. Este Guia de Instalação Rápida apresenta a placa-mãe e o guia de instalação passo a passo. Mais informações detalhadas sobre a placa-mãe podem ser encontradas no manual do usuário do CD de suporte.
  • Page 109 1.2 Especificações 1.2 Especificações 1.2 Especificações Plataforma - Formato Micro ATX: 9,6 pol. x 8,6 pol., 24,4 cm x 21,8 cm - Condensador Solid para alimentação da CPU - Suporte para processadores Socket AM2+ / AM2: Processador AMD Phenom FX / Phenom / Athlon 64 FX / Athlon 64 X2...
  • Page 110 - 1 x porta HDMI - 1 x porta óptica para saída SPDIF - 4 x portas USB 2.0 padrão - 1 x porta LAN RJ-45 com LED (LED ACT/LIG e LED VELOCIDADE) - HD Áudio Jack: Altifalante lateral / Altifalante traseiro /...
  • Page 111 AVISO Tenha em atenção que a operação de overclocking envolve alguns riscos, nomeadamente no que diz respeito ao ajuste das definições do BIOS, à aplicação da tecnologia Untied Overclocking ou à utilização de ferramentas de overclocking de terceiros. O overclocking pode afectar a estabilidade do seu sistema ou até...
  • Page 112 Devido às limitações do sistema operativo, o tamanho real da memória pode ser inferior a 4 GB uma vez que uma parte desta está reservada ® para utilização pelo sistema operativo no âmbito do Windows XP e do Windows ®...
  • Page 113 Veuillez noter que le lecteur flash USB ou le disque dur doit utiliser le système de fichiers FAT32/16/12. 13. O próprio nome do software – OC DNA diz-lhe literalmente aquilo de que é capaz. OC DNA, um utilitário exclusivo desenvolvido pela ASRock, proporciona uma forma conveniente para o utilizador gravar as definições OC e partilhar com outros.

  • Page 114: Precauções Antes Da Instalação

    2. Instalação 2. Instalação A790GMH/128M é uma Micro ATX forma factor (9.6-in x 8.6-in, 24.4 cm x 21.8 cm) tábua principal. Antes de instalar a tábua principal, estude a configuração do seu chassi para assegurar que a tábua principal apropria a isto.
  • Page 115 CPU no soquete, para evitar que os pinos fiquem tortos. º passo: Quando o CPU é na posição, clique-o firmemente na tomada quando abaixa o nível de tomada para segurar o CPU. O nível clique na tecla do lado para indicar que é trandado. Levantar o Nível Até...
  • Page 116 DIMM DDR2 (mesma marca, tipo, tamanho e tipo de chip) nos slots de mesma cor. Ou seja, é preciso instalar um par idêntico de DIMM DDR2 no duplo canal A (DDRII_1 e DDRII_2; slots amarelas; veja a folha 2, No. 6) ou um par idêntico de DIMM DDR2 no duplo canal B (DDRII_3 e DDRII_4;...
  • Page 117 DIMM puxando para fora os seus clipes de retenção. º passo: alinhe a DIMM no slot de forma que o entalhe da DIMM fique alinhado com a ranhura no slot. A DIMM somente se encaixa em uma orientação correta.
  • Page 118 Retire a tampa que cobre o slot que você deseja usar; reserve os parafusos para uso futuro. º passo: Alinhe o conector da placa com o slot e pressiona com firmeza, até que a placa esteja totalmente encaixada no slot. º...
  • Page 119 (veja a folha 2, No. 1) para PS/2 ou eventos de wake up na USB. Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais. Restaurar CMOS (CLRCMOS1, jumper de 3 pinos) (veja a folha 2, No. 24) Limpar o CMOS Configuração-...
  • Page 120 (veja a folha 2, No. 25) o lado com listras vermelhas para o Pino 1 Nota: Certifique-se de que o lado com listras vermelhas no cabo seja conectado ao lado Pino 1 do conector. Conector primário (Azul) (IDE1 de 39 pinos, veja a folha 2, No. 9)
  • Page 121 Conectores internos de áudio Estes conectores permitem que se receba entrada de (CD1 de 4 pinos) áudio em estéreo de fontes (CD1: veja a floha 2, No. 27) de áudio como CD-ROM, DVD-ROM, placa sintonizadora de TV ou placa MPEG. 1 4 1...
  • Page 122 Siga s instruções que aparecem no manual e no manual do chassis para instalar o sistema. 2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do painel frontal, como a figura abaixo mostra: A. Ligue o Mic_IN (MIC) ao MIC2_L.
  • Page 123 20 pinos. Para usar a fonte de alimentação de 29 pinos, por favor ligue a sua fonte de alimentação com o Pino 1 e o Pino 13. Instalação da Fonte de alimentação ATX de 20 Pinos Conector ATX 12 V Note que é...
  • Page 124 óptica em primeiro lugar. Depois, os controladores compatíveis com o seu sistema poderão ser detectados automaticamente e surgir na lista na página do controlador do CD de apoio. Por favor, siga a ordem de cima para baixo ao lado para instalar os controladores necessários. Assim, os controladores que instalar poderão funcionar devidamente.
  • Page 125 / Windows Vista de 64 bits nas suas unidades de disco rígido SATA / SATAII sem as funções RAID, siga as etapas a seguir descritas. Use SATA / SATAII HDDs sem NCQ e Hot Plug funções ETAPA 1: Aceda à BIOS.
  • Page 126 Mode” (Modo de overclock) da configuração da BIOS para definir a função de [Auto] para [CPU, PCIE, Async.]. Por outras palavras, o FSB da CPU é separado durante o overclocking, mas os buses PCI e PCIE permanecem fixos para que o FSB possa funcionar num ambiente de overclocking mais estável.
  • Page 127 64 bits / Win7. O CD de instalação que acompanha a placa Mãe contem: drivers e utilitários necessários para um melhor desempenho da placa Mãe. Para começar a usar o CD de instalação, introduza o CD na leitora de CD-ROM do computador. Automaticamente iniciará o menu principal, casa o “AUTORUN”...
  • Page 128 1 4 8 1 4 8 1 4 8 1 4 8 1 4 8 ASRock A790GMH/128M Motherboard...
  • Page 129 ‘ ’ ® ® 1 4 9 1 4 9 1 4 9 1 4 9 1 4 9 ASRock A790GMH/128M Motherboard...
  • Page 130 1 5 0 1 5 0 1 5 0 1 5 0 1 5 0 ASRock A790GMH/128M Motherboard...
  • Page 131 ® “ ” ® ® ® ® “ ” “ ” 1 5 1 1 5 1 1 5 1 1 5 1 1 5 1 ASRock A790GMH/128M Motherboard...
  • Page 132 ® ® 1 5 2 1 5 2 1 5 2 1 5 2 1 5 2 ASRock A790GMH/128M Motherboard...
  • Page 133 1 5 3 1 5 3 1 5 3 1 5 3 1 5 3 ASRock A790GMH/128M Motherboard...
  • Page 134 1 5 4 1 5 4 1 5 4 1 5 4 1 5 4 ASRock A790GMH/128M Motherboard...
  • Page 135 “ ” 1 5 5 1 5 5 1 5 5 1 5 5 1 5 5 ASRock A790GMH/128M Motherboard...
  • Page 136 1 5 6 1 5 6 1 5 6 1 5 6 1 5 6 ASRock A790GMH/128M Motherboard...
  • Page 137 ® ® ® 1 5 7 1 5 7 1 5 7 1 5 7 1 5 7 ASRock A790GMH/128M Motherboard...
  • Page 138 “ ” “ ” “ ” “ ” 1 5 8 1 5 8 1 5 8 1 5 8 1 5 8 ASRock A790GMH/128M Motherboard...
  • Page 139 SATAII_5 SATAII_6 (PORT 4) (PORT 5) SATAII_1 SATAII_2 SATAII_3 SATAII_4 (PORT 0) (PORT 1) (PORT 2) (PORT 3) 1 5 9 1 5 9 1 5 9 1 5 9 1 5 9 ASRock A790GMH/128M Motherboard...
  • Page 140 1 6 0 1 6 0 1 6 0 1 6 0 1 6 0 ASRock A790GMH/128M Motherboard...
  • Page 141 1 6 1 1 6 1 1 6 1 1 6 1 1 6 1 ASRock A790GMH/128M Motherboard...
  • Page 142 ® ® 1 6 2 1 6 2 1 6 2 1 6 2 1 6 2 ASRock A790GMH/128M Motherboard...
  • Page 143 ® ® ® ® ® ® ® ® ® ® ® 1 6 3 1 6 3 1 6 3 1 6 3 1 6 3 ASRock A790GMH/128M Motherboard...
  • Page 144 ® ® ® ® ® ® ® “ ” 1 6 4 1 6 4 1 6 4 1 6 4 1 6 4 ASRock A790GMH/128M Motherboard...
  • Page 145 “ ” “ ” 1 6 5 1 6 5 1 6 5 1 6 5 1 6 5 ASRock A790GMH/128M Motherboard...
  • Page 146 1 6 6 1 6 6 1 6 6 1 6 6 1 6 6 ASRock A790GMH/128M Motherboard...
  • Page 147 ‘ ’ ® ® 1 6 7 1 6 7 1 6 7 1 6 7 1 6 7 ASRock A790GMH/128M Motherboard...
  • Page 148 1 6 8 1 6 8 1 6 8 1 6 8 1 6 8 ASRock A790GMH/128M Motherboard...
  • Page 149 ® ® ® “ ” 1 6 9 1 6 9 1 6 9 1 6 9 1 6 9 ASRock A790GMH/128M Motherboard...
  • Page 150 ® ® ® ® ® ® ® ® 1 7 0 1 7 0 1 7 0 1 7 0 1 7 0 ASRock A790GMH/128M Motherboard...
  • Page 151 – 1 7 1 1 7 1 1 7 1 1 7 1 1 7 1 ASRock A790GMH/128M Motherboard...
  • Page 152 1 7 2 1 7 2 1 7 2 1 7 2 1 7 2 ASRock A790GMH/128M Motherboard...
  • Page 153 1 7 3 1 7 3 1 7 3 1 7 3 1 7 3 ASRock A790GMH/128M Motherboard...
  • Page 154 1 7 4 1 7 4 1 7 4 1 7 4 1 7 4 ASRock A790GMH/128M Motherboard...
  • Page 155 1 7 5 1 7 5 1 7 5 1 7 5 1 7 5 ASRock A790GMH/128M Motherboard...
  • Page 156 ® ® ® 1 7 6 1 7 6 1 7 6 1 7 6 1 7 6 ASRock A790GMH/128M Motherboard...
  • Page 157 1 7 7 1 7 7 1 7 7 1 7 7 1 7 7 ASRock A790GMH/128M Motherboard...
  • Page 158 SATAII_5 SATAII_6 (PORT 4) (PORT 5) SATAII_1 SATAII_2 SATAII_3 SATAII_4 (PORT 0) (PORT 1) (PORT 2) (PORT 3) 1 7 8 1 7 8 1 7 8 1 7 8 1 7 8 ASRock A790GMH/128M Motherboard...
  • Page 159 1 7 9 1 7 9 1 7 9 1 7 9 1 7 9 ASRock A790GMH/128M Motherboard...
  • Page 160 1 8 0 1 8 0 1 8 0 1 8 0 1 8 0 ASRock A790GMH/128M Motherboard...
  • Page 161 ® ® ® ® 1 8 1 1 8 1 1 8 1 1 8 1 1 8 1 ASRock A790GMH/128M Motherboard...
  • Page 162 ® ® ® ® ® ® 1 8 2 1 8 2 1 8 2 1 8 2 1 8 2 ASRock A790GMH/128M Motherboard...
  • Page 163 ® ® ® ® ® ® ® 1 8 3 1 8 3 1 8 3 1 8 3 1 8 3 ASRock A790GMH/128M Motherboard...
  • Page 164 ® ® 1 8 4 1 8 4 1 8 4 1 8 4 1 8 4 ASRock A790GMH/128M Motherboard...
  • Page 165 1 8 5 1 8 5 1 8 5 1 8 5 1 8 5 ASRock A790GMH/128M Motherboard...
  • Page 166 ™ ‘ ’ ® ® 1 8 6 1 8 6 1 8 6 1 8 6 1 8 6 ASRock A790GMH/128M Motherboard...
  • Page 167 1 8 7 1 8 7 1 8 7 1 8 7 1 8 7 ASRock A790GMH/128M Motherboard...
  • Page 168 ® ® ® ® ® ® 1 8 8 1 8 8 1 8 8 1 8 8 1 8 8 ASRock A790GMH/128M Motherboard...
  • Page 169 ® ® ® ® 1 8 9 1 8 9 1 8 9 1 8 9 1 8 9 ASRock A790GMH/128M Motherboard...
  • Page 170 1 9 0 1 9 0 1 9 0 1 9 0 1 9 0 ASRock A790GMH/128M Motherboard...
  • Page 171 1 9 1 1 9 1 1 9 1 1 9 1 1 9 1 ASRock A790GMH/128M Motherboard...
  • Page 172 DDRII_1 DDRII_2 DDRII_3 DDRII_4 1 9 2 1 9 2 1 9 2 1 9 2 1 9 2 ASRock A790GMH/128M Motherboard...
  • Page 173 1 9 3 1 9 3 1 9 3 1 9 3 1 9 3 ASRock A790GMH/128M Motherboard...
  • Page 174 ® ® ® 1 9 4 1 9 4 1 9 4 1 9 4 1 9 4 ASRock A790GMH/128M Motherboard...
  • Page 175 1 9 5 1 9 5 1 9 5 1 9 5 1 9 5 ASRock A790GMH/128M Motherboard...
  • Page 176 SATAII_5 SATAII_6 (PORT 4) (PORT 5) SATAII_1 SATAII_2 SATAII_3 SATAII_4 (PORT 0) (PORT 1) (PORT 2) (PORT 3) 1 9 6 1 9 6 1 9 6 1 9 6 1 9 6 ASRock A790GMH/128M Motherboard...
  • Page 177 1 9 7 1 9 7 1 9 7 1 9 7 1 9 7 ASRock A790GMH/128M Motherboard...
  • Page 178 1 9 8 1 9 8 1 9 8 1 9 8 1 9 8 ASRock A790GMH/128M Motherboard...
  • Page 179 ® ® ® ® ® ® ® ® ® ® ® ® ® ® 1 9 9 1 9 9 1 9 9 1 9 9 1 9 9 ASRock A790GMH/128M Motherboard...
  • Page 180 ® ® ® ® ® ® ® ® ® ® ® ® ® ® 2 0 0 2 0 0 2 0 0 2 0 0 2 0 0 ASRock A790GMH/128M Motherboard...
  • Page 181 ® ® 2 0 1 2 0 1 2 0 1 2 0 1 2 0 1 ASRock A790GMH/128M Motherboard...
  • Page 182 2 0 2 2 0 2 2 0 2 2 0 2 2 0 2 ASRock A790GMH/128M Motherboard...
  • Page 183 2 0 3 2 0 3 2 0 3 2 0 3 2 0 3 ASRock A790GMH/128M Motherboard...
  • Page 184 ® ® 2 0 4 2 0 4 2 0 4 2 0 4 2 0 4 ASRock A790GMH/128M Motherboard...
  • Page 185 2 0 5 2 0 5 2 0 5 2 0 5 2 0 5 ASRock A790GMH/128M Motherboard...
  • Page 186 ® ® ® ® ® ® 2 0 6 2 0 6 2 0 6 2 0 6 2 0 6 ASRock A790GMH/128M Motherboard...
  • Page 187 ® ® ® 2 0 7 2 0 7 2 0 7 2 0 7 2 0 7 ASRock A790GMH/128M Motherboard...
  • Page 188 ® 2 0 8 2 0 8 2 0 8 2 0 8 2 0 8 ASRock A790GMH/128M Motherboard...
  • Page 189 2 0 9 2 0 9 2 0 9 2 0 9 2 0 9 ASRock A790GMH/128M Motherboard...
  • Page 190 2 1 0 2 1 0 2 1 0 2 1 0 2 1 0 ASRock A790GMH/128M Motherboard...
  • Page 191 2 1 1 2 1 1 2 1 1 2 1 1 2 1 1 ASRock A790GMH/128M Motherboard...
  • Page 192 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 ASRock A790GMH/128M Motherboard...
  • Page 193 ® ® ® 2 1 3 2 1 3 2 1 3 2 1 3 2 1 3 ASRock A790GMH/128M Motherboard...
  • Page 194 2 1 4 2 1 4 2 1 4 2 1 4 2 1 4 ASRock A790GMH/128M Motherboard...
  • Page 195 SATAII_5 SATAII_6 (PORT 4) (PORT 5) SATAII_1 SATAII_2 SATAII_3 SATAII_4 (PORT 0) (PORT 1) (PORT 2) (PORT 3) 2 1 5 2 1 5 2 1 5 2 1 5 2 1 5 ASRock A790GMH/128M Motherboard...
  • Page 196 2 1 6 2 1 6 2 1 6 2 1 6 2 1 6 ASRock A790GMH/128M Motherboard...
  • Page 197 2 1 7 2 1 7 2 1 7 2 1 7 2 1 7 ASRock A790GMH/128M Motherboard...
  • Page 198 ® ® ® ® ® ® ® ® ® ® ® ® ® ® 2 1 8 2 1 8 2 1 8 2 1 8 2 1 8 ASRock A790GMH/128M Motherboard...
  • Page 199 ® ® ® ® ® ® ® ® ® ® ® ® ® ® 2 1 9 2 1 9 2 1 9 2 1 9 2 1 9 ASRock A790GMH/128M Motherboard...
  • Page 200 2 2 0 2 2 0 2 2 0 2 2 0 2 2 0 ASRock A790GMH/128M Motherboard...
  • Page 201 ® ® ® 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 ASRock A790GMH/128M Motherboard...

This manual is also suitable for:

A790gmh128m-2137

Table of Contents