Create Disk Array - ASROCK A330ION Installation Manual

2.3

Create Disk Array

After the system powers on, press <F2> key to enter BIOS setup utility.
Highlight Advanced and press <Enter>, then the main inter-face of BIOS setup
utility will appear. Please set the option "SATA Option Mode" to [RAID].
Advanced
SATA Configuration
Onboard SATA Controller
SATA Operation Mode
SATAII_1
SATAII_2
SATAII_3
ESATA
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
After adjusting the system BIOS to RAID mode, reboot your system. RAID driver is
built in NVIDIA ALL in one driver provided in our support CD. After you finish the driver
installation, you can create, delete, or rebuild any RAID array. Please enter Storage
by clicking on Start
Panel Storage. (There is also a "Storage" shortcut on the desktop.)
1 0 1 0 1 0 1 0 1 0
BIOS SETUP UTILITY
Enabled
[Enabled]
Disabled
[RAID]
[ATAPI CDROM]
[Hard Disk]
[Not Detected]
[Not Detected]
+- +-
F1 F1
F9 F9
F10 F10
ESC ESC
Programs NVIDIA Corporation
Options
Select Screen Select Screen
Select Item Select Item
Change Option Change Option
General Help General Help
Load Defaults Load Defaults
Save and Exit Save and Exit
Exit Exit
NVIDIA Control