Installation Installation; Pre-Installation Precautions - ASROCK 939N68PV-GLAN User Manual

Hide thumbs Also See for 939N68PV-GLAN:

Table of Contents

2. 2. 2. 2. 2. Installation

Installation

939N68PV-GLAN is a Micro ATX form factor (9.6-in x 8.6-in, 24.4 cm x 21.8 cm)

motherboard. Before you install the motherboard, study the configuration of your chas-

sis to ensure that the motherboard fits into it.

Take note of the following precautions before you install motherboard compo-

nents or change any motherboard settings.

Before you install or remove any component, ensure that the

power is switched off or the power cord is detached from the

power supply. Failure to do so may cause severe damage to

the motherboard, peripherals, and/or components.

Unplug the power cord from the wall socket before touching any

component.

To avoid damaging the motherboard components due to static electricity,

NEVER place your motherboard directly on the carpet or the like. Also

remember to use a grounded wrist strap or touch a safety grounded

object before you handle components.

Hold components by the edges and do not touch the ICs.

Whenever you uninstall any component, place it on a grounded anti-

static pad or in the bag that comes with the component.

When placing screws into the screw holes to secure the motherboard

to the chassis, please do not over-tighten the screws! Doing so may

damage the motherboard.

1 2

Table of Contents

939n68pv-glan - v1.0