Cpu Configuration - ASROCK 939DUAL-SATA2 User Manual

Hide thumbs Also See for 939DUAL-SATA2:
Table of Contents

Advertisement

3.3.1 CPU Configuration

3.3.1
3.3.1
CPU Configuration
CPU Configuration
CPU Configuration
3.3.1
3.3.1
CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
Spread Spectrum
Cool' n' Quiet
Processor Maximum Multiplier
Processor Maximum Voltage
Multiplier/Voltage Change
Memory Clock
Flexibility Option
Burst Length
CAS Latency (CL)
TRCD
TRAS
TRP
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Cnfiguration
options: [Auto], [CPU, PCIE, Sync.] and [CPU, PCIE, Async.].
CPU Frequency (MHz)
Use this option to adjust CPU frequency. The range is from 140MHz to
300MHz. The default value is [200].
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency. The range is from 70MHz to
150MHz. The default value is [100].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This feature will be set to [Auto] as default.
Cool 'n' Quiet
Use this item to enable or disable AMD's Cool 'n' Quiet
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Multiplier and Processor Voltage. However, it is recom-
mended to keep the default value for system stability.
If AUTO, multiplier and
[Auto]
voltage will be left at the
[200]
rated frequency/voltage. If
[100]
Manual,
multiplier and
[Enabled]
voltage
will be set based
[Auto]
on User Selection in Setup.
[Enabled]
x11 2200 MHz
1.450 V
[Auto]
[Auto]
Select Screen
Select Screen
[Disabled]
Select Item
Select Item
[4 Beats]
+-
+-
Change Option
Change Option
[Auto]
F1
F1
General Help
General Help
[Auto]
F9
F9
Load Defaults
Load Defaults
[Auto]
F10
F10
Save and Exit
Save and Exit
[Auto]
ESC
ESC
Exit
Exit
2 5
2 5
2 5
2 5
2 5
technology.
TM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents