Spread Spectrum - ASROCK 939A8X-M User Manual

CPU Host Frequency
While entering setup, BIOS auto detects the present CPU host frequency of
this motherboard. The actual CPU host frequency will show in the following
item.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.

Spread Spectrum

This item should always be [Disabled] for better system stability.
Cool 'n' Quiet
Use this item to enable or disable AMD's Cool 'n' Quiet
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Multiplier and Processor Voltage. However, it is recom-
mended to keep the default value for system stability.
BIOS SETUP UTILITY
Advanced
CPU Configuration
CPU Host Frequency
Actual Frequency (MHz)
Boot Failure Guard
Spread Spectrum
Cool' n' Quiet
Processor Maximum Multiplier
Processor Maximum Voltage
Multiplier/Voltage Change
Processor Multiplier
Processor Voltage
Memory Clock
Flexibility Option
Burst Length
CAS Latency (CL)
TRCD
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Cool' n' Quiet
Processor Maximum Multiplier
Processor Maximum Voltage
Multiplier/Voltage Change
Processor Multiplier
Processor Voltage
Memory Clock
Flexibility Option
Burst Length
CAS Latency (CL)
TRCD
TRAS
TRP
MA Timing
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
If AUTO, FID/VID will
[Auto]
be left at the rated
[200]
frequency/voltage. If
[Enabled] Manual, FID/VID will
[Disabled]
be set based on User
[Enabled]
Selection in Setup.
x11
1.550 V
[Manual]
[x8]
[1.500V]
Select Screen Select Screen
Select Item Select Item
[Auto]
+- +- Change Option Change Option
[Disabled]
F1 F1 General Help General Help
[8 Beats]
F9 F9 Load Defaults Load Defaults
[Auto]
F10 F10 Save and Exit Save and Exit
[Auto]
ESC ESC Exit Exit
[Enabled]
Select DRAM commands
x11
and address timing.
1.550 V
[Manual]
[x8]
[1.500V]
[Auto]
[Disabled]
[8 Beats]
[Auto]
[Auto]
[Auto] Select Screen Select Screen
[Auto]
Select Item Select Item
[2T]
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
2 4 2 4 2 4 2 4 2 4
TM technology.