Storage Configuration - ASROCK 890GM PRO3 User Manual

3.4.4

3.4.4 Storage Configuration

3.4.4 3.4.4 3.4.4 Storage Configuration Storage Configuration Storage Configuration Storage Configuration
BIOS SETUP UTILITY
Advanced
Storage Configuration
[Enabled]
Onboard SATA Controller
SATA Operation Mode [IDE]
[Enabled]
SATA IDE Combined Mode
eSATA Mode [Gen2]
SATA1 [Hard Disk]
SATA2 [Not Detected]
SATA3 [Not Detected]
SATA4 [Not Detected]
[Not Detected]
SATA5
eSATA [Not Detected]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Onboard SATA Controller
Use this item to enable or disable the "Onboard SATA Controller" feature.
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this
option is [IDE]. Configuration options: [AHCI], [RAID] and [IDE].
If you set this item to RAID mode, it is suggested to install
SATA ODD driver on SATA5 port.
AMD AHCI BIOS ROM
Use this item to enable or disable AMD AHCI BIOS ROM. This option appears
only when you set "SATA Operation Mode" to [AHCI]. The default value is
[Disabled].
SATA IDE Combined Mode
This item is for SATA5 and eSATA ports only. Use this item to enable or
disable SATA IDE combined mode. The default value is [Enabled].
If you want to build RAID on SATA5 and eSATA ports, please
disable this item.
eSATA Mode
Use this item to select eSATA mode. Configuration mode: [Auto] and [Gen2].
The default value is [Gen2]. If you use SATA Gen3, please select [Auto].
Configure onboard
serial ATA
controller.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
5 1 5 1 5 1 5 1 5 1